Stainless Steel Both End Threaded Nipple

Stainless Steel 904L Nipple Manufactures In India

Sachiya Steel International is one of the well-known manufacturing units for Stainless Steel 904L Nipple, which is quite ductile and forms easily. The addition of molybdenum and nitrogen in Stainless Steel 904L Hexagon Reducing Nipple implies more powerful processing equipment may be necessary when compared with the standard 304 / 304L grades. Segregation is less evident in Stainless Steel 904L Hexagon Nipple, and this material is normally welded using a filler metal of the same composition as the base metal and can even be welded without filler metal.

The cold work hardening rate of Stainless Steel 904L One End Threaded Nipple makes it less machinable than 410 and 304 stainless steels. With its highly alloyed chemistry — 25 % nickel and 4.5 % molybdenum, Stainless Steel 904L Both End Threaded Nipple provides good chloride stress corrosion cracking resistance, pitting and general corrosion resistance superior to 316L and 317L molybdenum enhanced alloys.

Stainless Steel 904L Nipple


 Stainless Steel 904L Concentric Swaged Nipple was originally developed to withstand environments containing dilute sulphuric acid. SS 904L Eccentric Swaged Nipple also offers good resistance to other inorganic acids such as hot phosphoric acid as well as most organic acids. 904L Stainless Steel Nipple is easily welded and processed by standard shop fabrication practices. The high content of alloying elements in SS 904L Nipple gives the alloy exceptionally good resistance to uniform corrosion. Grade 904L Nipple provides full resistance in such environments within the entire concentration range of 0 % to 100 %.

Stainless Steel 904L Nipple

Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 904L Nipple Chemical Composition

Grade C Mn Si P S Cr MO Ni Cu
904L min. 19.0 4.0-5.0 23.0 1.0
max. 0.20 2.0 1.0 0.045 0.035 23.0 28.0 2.0

Stainless Steel 904L Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
446 490 220 35 70-90 typical

Equivalent Grades for 904L Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS KS AFNOR EN
SS 904L 1.4539 N08904 SUS 904L 904S13 STS 317J5L Z2 NCDU 25-20 X1NiCrMoCu25-20-5

Stainless Steel 904L Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 904L Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-09T12:17:13+05:30April 22nd, 2021|Nipple|

Stainless Steel 446 Nipple Manufactures In India

Sachiya Steel International is one of the prominent suppliers and distributor of Stainless Steel 446 Nipple, which offers good resistance to polythionic acid stress corrosion cracking and is also encountered in oil refineries. These SS 446 Hexagon Reducing Nipple is the original “18 – 8” stainless and is produced in greater quantity than any other austenitic stainless steel.

Our Stainless Steel 446 Hexagon Nipple provides useful resistance to corrosion in many environments ranging from moderately reducing to moderately oxidizing. Through the controlled addition of nitrogen, it is common for this Stainless Steel 446 One End Threaded Nipple to meet the mechanical properties of 304 straight grades. Our Stainless Steel 446 Both End Threaded Nipple has slightly improved corrosion resistance over type 321 stainless steel in strongly oxidizing environments.

Stainless Steel 446 Nipple

This Stainless Steel 446 Concentric Swaged Nipple is stabilized with columbium and is preferable for aqueous and low temperature environments due to its good resistance to inter – granular attack. The high temperature oxidation resistance of our Stainless Steel 446 Eccentric Swaged Nipple is similar to that of stainless steel 304, which is useful to 1500 Degree F and also has good creep strength up to 1500 Degree F. These 446 Stainless Steel Nipple is an age – harden able iron base super – alloy for applications requiring high strength from -320 Degree Fahrenheit up to 1000 Degree Fahrenheit long time, 1300 Degree Fahrenheit – 1500 Degree Fahrenheit short time.

Stainless Steel 446 Nipple

Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 446 Nipple Chemical Composition

Grade C Mn Si P S Cr MO Ni N
446 min. 23.0 0.10
max. 0.20 1.5 0.75 0.040 0.030 30.0 0.50 0.25

Stainless Steel 446 Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
446 485 275 20 92 201

Equivalent Grades for 446 Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 446 1.4762 S44600 SUS 446

Stainless Steel 446 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 446 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-09T12:31:19+05:30April 22nd, 2021|Nipple|

Stainless Steel 410 Nipple Manufacturers In India

Sachiya Steel International is one of the well-established exporter and seller of Stainless Steel 410 Nipple, which is used for highly stressed parts where a degree of corrosion resistance, strength and ductility are required. Stainless Steel 410 Hexagon Reducing Nipple may be used for steam turbine buckets, blades, bucket covers, gas turbine compressor blades, nuclear reactor control rod mechanisms, forged valves, fasteners, shafting, pump parts and machine parts.

Stainless Steel 410 Hexagon Nipple can be used up to 1200 Degree F (650 Degree C) where resistance to scaling is required, and readily hot worked by forging and upsetting. SS 410 One End Threaded Nipple may be readily forged, headed or upset, where it requires more blows or a heavier hammer than mild steel.

If tempering of Stainless Steel 410 Both End Threaded Nipple in this range is necessary to obtain the desired strength and ductility values, it may be that in many cases the reduced impact strength is not a problem and that the corrosion resistance is only slightly reduced. SS 410 Concentric Swaged Nipple should be heated uniformly to 2000 Degree F / 2200 Degree F (1095 Degree C / 1205 Degree C), depending upon the degree of deformation, then forged and air cooled. Large forgings should be furnace cooled or cooled in dry lime, and thus SS 410 Eccentric Swaged Nipple should not be forged below 1650 Degree F (900 Degree C).

Stainless Steel 410 Nipple

Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 410 Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
410 min. 11.5
max. 0.15 1.0 1.00 0.040 0.030 13.5 0.75

Stainless Steel 410 Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 95 201

Equivalent Grades for 410 Stainless Steel Nipple

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410

Stainless Steel 410 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 410 Nipple Test Certificates

We at Sachiya Sachiya International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-26T12:27:19+05:30April 19th, 2021|

Stainless Steel 347H Nipple Manufacturers In India

Sachiya Steel International is one of the prominent exporting houses of Stainless Steel 347H Nipple, which serve as a very competitive alternative to expensive nickel alloys and high – alloy austenitic stainless steels in the most demanding applications, such as hot tropical seawater. In addition, Stainless Steel 347H Hexagon Reducing Nipple has only half the weight of steel. Our SS 347H Hexagon Nipple is non – magnetic and characterized by a high melting point, high strength – to – weight ratio and a low modulus of elasticity.

These Stainless Steel 347H One End Threaded Nipple is highly resistant to a wide range of acids and bases, both organic and inorganic, which makes it an interesting and exceptional long – life alternative to other materials in highly demanding applications. Our SS 347H Both End Threaded Nipple has very high resistance to chloride corrosion, combined with very high mechanical strength.

Many elements and compounds that are not normally classified as alloys under high pressures, these Stainless Steel 347H Concentric Swaged Nipple are formed as metallic allotropes of non – metals. The strength and resilience of our Stainless Steel 347H Eccentric Swaged Nipple has led to their frequent use in high – rise building and bridge construction, as well as most vehicles, many home appliances, tools, pipes, non – illuminated signs and railroad tracks. Painting, anodizing or plating are good ways to prevent corrosion of these 347H Stainless Steel Nipple.

Stainless Steel 347H Nipple

Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 347H Nipple Chemical Composition

Grade C Mn Si P S Cr Cb Ni Fe
SS 347H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 20.00 8xC – 1.10 9.00 – 13.00 63.72 min

Stainless Steel 347H Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 347H Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347H 1.4961 S34709 SUS 347H X6CrNiNb18-12

Stainless Steel 347H Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 347H Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-27T11:29:06+05:30April 19th, 2021|

Stainless Steel 347 Nipple Manufacturers In India

Sachiya Steel International is one of the well-known manufacturers of Stainless Steel 347 Nipple, in which silver brazing compounds are known to cause stress cracking in nickel – based alloys. Rupture and creep properties of SS 347 Hexagon Reducing Nipple shown in this bulletin are typical of material receiving this low – temperature treatment.

Slow response of Stainless Steel 347 Hexagon Nipple to age hardening enables parts to be welded and directly age – hardened without an intermediate stress relief. If Stainless Steel 347 One End Threaded Nipple is cold – worked and / or precipitation – hardened, silver brazing compounds should not be used.

Also, SS 347 Both End Threaded Nipple containing cadmium are best avoided; while cadmium has not been shown to cause cracking by itself, it can aggravate cracking from other sources. Room – temperature properties of welds in Stainless Steel 347 Concentric Swaged Nipple receiving the low temperature anneal and / or age can be compared with results of the high – temperature anneals and / or age.

Additional properties of welds in Stainless Steel 347 Eccentric Swaged Nipple is annealed at 1950 Degree and aged at 1400 Degree F to 1200 Degree F, hold at 1200 Degree F for a total aging time of 20 hours. Welding was by the manual gas tungsten-arc process, using 347 Stainless Steel Nipple, where these welds were found satisfactory in bend tests and radiographic examination.

Stainless Steel 347 Nipple

Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 347 Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
347 min. 17.0 9.0
max. 0.08 2.0 1.0 0.040 0.030 20.0 13.0

Stainless Steel 347 Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
347 515 205 40 92 201

Equivalent Grades for 347 Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347 1.4550 S34700 SUS 347 08Ch18N12B X6CrNiNb18-10

Stainless Steel 347 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 347 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-27T17:42:20+05:30April 14th, 2021|

Stainless Steel 321 Nipple Manufactures In India

Sachiya Steel International is a well-known firm that manufactures and supplies a wide range of Stainless Steel 321 Nipple, which cannot be hardened by thermal treatment. Stainless Steel 321 Nipple is stabilized against chromium carbide formation by the addition of titanium. However, welded Stainless Steel 321H Nipple must never be used in highly oxidizing environments as it is liable to ‘Knife-line’ attack.

Characterized by high corrosion resistance in general atmospheric corrosive environments, SS 321 Hexagon Reducing Nipple exhibits excellent resistance to most oxidizing agents. This heat resistant grade of SS 321H Hexagon Nipple has a maximum dry air service temperature of 850 º C. Like other austenitic stainless steels, Alloy 321 One End Threaded Nipple works harden quickly and may require annealing after severe forming. Alloy 321H Both End Threaded Nipple is stabilized against weld heat affected zone (HAZ) inter-granular corrosion.

The titanium in this 321 Stainless Steel Nipple forms insoluble and stable carbide, which ties up all the carbon in the alloy and therefore prevents it from precipitating as chromium carbides. Our 321H Stainless Steel Nipple is readily welded by most standard processes and is very ductile and forms easily. This Grade 321 Concentric Swaged Nipple must be water quenched or fully annealed after working to re-attain maximum corrosion resistance. The following are some of the major applications of our Grade 321H Eccentric Swaged Nipple, such as aircraft exhaust stacks and manifolds.

Stainless Steel 321/321H Nipple

Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 321/321H Nipple Chemical Composition

Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max

Stainless Steel 321/321H Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 321/321H Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

Stainless Steel 321/321H Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 321/321H Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-29T12:25:13+05:30April 14th, 2021|

Stainless Steel 317L Nipple Manufacturers In India

Sachiya Steel International is one of the prominent dealer and trader of Stainless Steel 317L Nipple, which is used in the processing of mineral ores and concentrates. Reducing the impact of mining and quarrying on the landscape of Stainless Steel 317L Hexagon Reducing Nipple and on the environment is undoubtedly a key challenge facing the growing mining sector. Effective ore – processing practices and the efficient production of Stainless Steel 317L Hexagon Nipple can help to limit the environmental impact by reducing the volumes of material that have to be transported and processed by potentially hazardous thermal and chemical refining methods.

The strength of SS 317L One End Threaded Nipple, combined with its resistance to wear and corrosion, makes it a prime candidate for pumps, screens, filters, etc. An extensive program of cooking operations using household recipes has shown that, apart from aberrant values associated with new pans on first use of SS 317L Concentric Swaged Nipple, the contribution made by 19 % Cr / 9 % Ni stainless steel cooking utensils to chromium and nickel in the diet is negligible.

Stainless Steel 317L Eccentric Swaged Nipple is a highly durable material used in many qualified applications. Like all materials, the production of 317L Stainless Steel Nipple and use affect the environment in many different ways. As the family of alloys collectively known as SS 317L Nipple continues to expand, so do their potential applications throughout industry.

Stainless Steel 317L Nipple

Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 317L Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.89 min

Stainless Steel 317L Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317L Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317L 1.4438 S31703 SUS 317L X2CrNiMo18-15-4

Stainless Steel 317L Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 317L Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-30T12:32:31+05:30April 12th, 2021|

Stainless Steel 317 Nipple Manufacturers In India

Sachiya Steel International is one of the well-known exporting houses of high quality Stainless Steel 317 Nipple, which has excellent resistance to a wide variety of corrosive media. Stainless Steel 317 Hexagon Reducing Nipple has reasonable resistance to salt water in cold southern waters but is unlikely to be successful in warmer tropical waters.

Overall the corrosion resistance of Stainless Steel 317 Hexagon Nipple is approximately the same as or slightly below that of Grade 304. Performance of SS 317 One End Threaded Nipple is best with a smooth surface finish, in the hardened and tempered condition. Heat this Stainless Steel 317 Both End Threaded Nipple up to 980 Degree C – 1035 Degree C, followed by quenching in oil or air, where oil quenching is necessary for heavy sections.

Temper this Stainless Steel 317 Concentric Swaged Nipple at 150 Degree C – 370 Degree C to obtain a wide variety of hardness values and mechanical properties as indicated in the accompanying table. Stainless Steel 317 Eccentric Swaged Nipple resists scaling in intermittent service to 925 Degree C and in continuous service to 870 Degree C, but is generally not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties.

Welding of these 317 Stainless Steel Nipple is difficult due to the risk of cracking, where a pre – heat of 200 Degree C – 300 Degree C is recommended prior to welding.

Stainless Steel 317 Nipple

Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 317 Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 317 0.08 max 2 max 1.0max 0.045 max 0.030 max 18 – 20 3.0-4.0 11.0-15.0 57.845 min

Stainless Steel 317 Nipple Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317

Stainless Steel 317 Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 317 Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-04T13:02:39+05:30April 12th, 2021|

Stainless Steel 316 Nipple Manufactures In India

Stainless Steel 316 Nipple Manufactures In India

Sachiya Steel International is one of the well-established producers for Stainless Steel 316 Nipple, which may be formed on equipment similar to carbon steel, and are readily blanked and pierced. Stainless Steel 316 Hexagon Reducing Nipple covers high – strength low – alloy shapes intended for riveted, bolted, or welded construction of bridges, or for other construction applications.

It is common to fabricate SS 316L Hexagon Nipple into many different shapes. Stainless Steel 316 One End Threaded Nipple has excellent malleability means they perform well in deep drawing, spinning, stretching and bending. Stainless Steel 316L Both End Threaded Nipple has a lower grade of wear resistant steel plate, which is an as – rolled product made to a chemistry to achieve a desired Brinell range.

Stainless Steel 316 Concentric Swaged Nipple is used in applications of slight abrasion where abrasion resistance combined with economy is the primary concern.

SS 316L Eccentric Swaged Nipple is a versatile general purpose stainless steel product with good resistance to atmospheric corrosion, many organic and inorganic chemicals, and to food and beverages.

Stainless Steel 316 Nipple is used when end product requires a lot of welding, which is further widely used in chemical processing plants. The combination of chromium, nickel, molybdenum, and copper make Stainless Steel 316L Nipple resistant in a range of sulphuric acid environments. Process environments that do not corrode Alloy 316 Nipple will not attack this grade.

Stainless Steel 316/316L Nipple

Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 316/316L Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
316 min. 16.0 2.0-3.0 10.0
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0
316L min. 16.0 2.0-3.0 10.0
max. 0.035 2.0 0.75 0.045 0.030 18.0 14.0

Stainless Steel 316/316L Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316 515 205 40 95 217
316L 485 170 40 95 217

Equivalent Grades for 316/316L Stainless Steel Nipple

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3

Stainless Steel 316/316L Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 316/316L Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-22T19:31:44+05:30April 9th, 2021|

Stainless Steel 310H Nipple Manufacturers In India

Stainless Steel 310H Nipple Manufacturers In India

Sachiya Steel International is one of the well-established trader & dealer of high quality Stainless Steel 310H Nipple, which is the material that is often good conductor of electricity and heat. Surface of this Stainless Steel 310H Hexagon Reducing Nipple can be smooth with bluish glow, which further has all the properties that can be defined as metal.

Our Stainless Steel 310H Hexagon Nipple corrode easily, while others form a protective oxide layer as well as the semi – metals. This Stainless Steel 310H One End Threaded Nipple is not a pure chemical element, but it is an alloy of two or more other chemical elements, therefore it cannot be defined as a metal, neither added to the periodic table of elements. Besides, our Stainless Steel 310H Both End Threaded Nipple contains carbon and other non – metallic impurities which also exclude it from the group of metals.

This Stainless Steel 310H Concentric Swaged Nipple has carbon content and is a preferred choice for high temperature applications. Our SS 310H Eccentric Swaged Nipple has good resistance to oxidation at temperatures of up to 1040 Degree C (1904 Degree F) in intermittent service and 1150 Degree C (2102 Degree F) in continuous service. This 310H Stainless Steel Nipple is widely used in environments where Sulphur dioxide gas is present at high temperatures. The lower carbon content of Grade 310S Nipple does reduce its high temperature strength compared to our Grade 310H Nipple.

Stainless Steel 310H Nipple Specification

Specifications : ASTM A182 & ASME SA182
Size : 1/4″ to 4″
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

SS 310H Nipple Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
310H min. 0.04 24.0 19.0
max. 0.10 2.0 1.00 0.045 0.03 26.0 21.0

Stainless Steel 310H Nipple Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
310H 515 205 40 95 217

Equivalent Grades for 310H Stainless Steel Nipple

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
310H S31009

Stainless Steel 310H Nipple Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 310H Nipple Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-13T16:44:49+05:30April 9th, 2021|
Go to Top