Stainless Steel 310 Wire Mesh Manufacturers In India

Stainless Steel 310 Wire Mesh Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Wire Mesh, which contain 16 percent to 26 percent chromium and up to 35 percent nickel, which, like manganese, is a strong austenite. SS 310 Hexagonal Wire Mesh has characteristics from an invisible, self – healing chromium oxide film that forms when chromium is added at concentrations greater than 10.5 percent. The best corrosion resistance is obtained in this austenitic Stainless Steel 310S Welding Wire Mesh, where their microstructures consist of very clean crystals in which all alloying elements are held in solid solution.

Stainless Steel 310 Wire Mesh

Austenitic SS 310 Netting Wire Mesh cannot be hardened by heat treatment; they are also nonmagnetic. The ferritic and martensitic Stainless Steel 310S Woven Wire Mesh both have an excellent microstructure, where the latter has a higher carbon level and can be hardened and is used for knives and tools. Stainless Steel 310 Spring Steel Wire Mesh contain only up to 0.12 percent carbon, which also have chromium as their main alloy addition and practically no nickel.

Corrosion resistance of this Stainless Steel 310S Fencing Wire Mesh is modest, and they are ferromagnetic. SS 310 Wire Mesh is employed at high temperatures — e.g., 800 Degree C (1,450 Degree F). Solution hardening of this Stainless Steel 310S Wire Mesh is used in this group to keep the steels strong at such heat.

Stainless Steel 310 Wire Mesh Specifications

Specifications : ASTM A 164 ASME SA 164
Standard : ASTM, ASME International Standards
Length : 30m to 100″
Width : 1m to 48″
Type : Wire Mesh , Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh , Spring Steel wire mesh, Fencing Wire mesh etc.

310/310S Stainless Steel Wire Mesh Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 – 26.00 0.10 max 19.00 – 21.00 54.7 min
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 0.75 max 19.00 – 21.00 53.095 min

Stainless Steel 310S Wire mesh Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 310S Stainless Steel Wire mesh

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21

SS 310/310S Wire Mesh Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

310/310S Steel Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)