Stainless Steel 310 Buttweld Fittings Manufacturer In India

Stainless Steel 310 Buttweld Fittings Manufacturer In India

Sachiya Steel International is one of the well-known Manufacture And Exporter for high quality Stainless Steel 310 Buttweld Fittings , which is used widely in the construction of roads, railways, other infrastructure, appliances, and buildings. Stainless Steel 310 Elbow Butt Weld Pipe Fittings is also used for most large modern structures, such as stadiums and skyscrapers, bridges, and airports. Even those with a concrete structure employ Stainless Steel 310S Tee Butt Weld Pipe Fittings for reinforcing, where in addition it sees widespread use in major appliances and cars.

Stainless Steel 310 Buttweld Fittings

Stainless Steel 310 Reducer is a mixture of several metals (this is called an alloy) but most of it is iron, which is harder and stronger than iron. Stainless Steel 310S Cross Butt Weld Pipe Fittings are often iron alloys with between 0.02 % and 1.7 % percent carbon by weight. Stainless Steel 310 Bend Butt Weld Pipe Fittings with more carbon than this are known as cast iron, in which carbon is replaced with other alloying materials.

Stainless Steel 310S Stub End is different from wrought iron that has little or no carbon, where variations and combinations of production routes also exist. Stainless Steel 310 End Cap Butt Weld Pipe Fittings is an alloy of iron and carbon containing less than 2 % carbon and 1 % manganese and small amounts of silicon, phosphorus, Sulphur and oxygen.

Stainless Steel SS 310 / 310S Pipe Fittings Specifications

Specifications : ASTM A403 / ASME SA403
Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

SS 310 / 310S Pipe Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 310 0.015 max 2 max 0.015 max 0.020 max 0.015 max 24.00 – 26.00 0.10 max 19.00 – 21.00 54.7 min
SS 310S 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24.00 – 26.00 0.75 max 19.00 – 21.00 53.095 min

Stainless Steel 310 / 310S Buttweld Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 310 / 310S Stainless Steel Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310S 310S16 20Ch23N18 X8CrNi25-21

SS 310 / 310S Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 310 / 310S Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

 

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)