LOGO 1200 X 300

nut screw size chart pdf

Stainless Steel 310 Screw Manufacturers In India

Stainless Steel 310 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 310 Screw, which is available in different sizes and shapes. Between 912 Degree C and 1,394 Degree C, Stainless Steel 310 Hex Head Screws is in its order, which is called austenite or gamma iron. The allotropic behavior of iron is retained with few exceptions in these Stainless Steel 310S Socket Head Cap Screws, even when the alloy contains considerable amounts of other elements.

Stainless Steel 310 Screw

Stainless Steel 310 Socket Set Screws refers not to mechanical properties but rather to the strong magnetic characteristics of iron. Below 770 Degree C (1,420 Degree F), these Stainless Steel 310S Anchors Screws is ferromagnetic, where the temperature above which it loses this property is often called the Curie point. Adjusting the carbon content is the simplest way to change the mechanical properties of Stainless Steel 310 Blind Rivet Screws. Additional changes are made possible by heat – treating in these Stainless Steel 310S Concrete Screws — for instance, by accelerating the rate of cooling through the austenite-to-ferrite transformation point.

The reason for this increasing hardness in Stainless Steel 310 Threaded Screws is the formation of a finer pearlite and ferrite microstructure than can be obtained during slow cooling in ambient air. In principle, when these Stainless Steel 310S Steel Shoulder Screws cools quickly, there is less time for carbon atoms to move through the lattices and form larger carbides.

Stainless Steel 310 Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

310 Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
310
 min. – – – – – 24.0 – 19.0 –
max. 0.25 2.0 1.50 0.045 0.030 26.0 22.0 –

Stainless Steel 310 – 310S Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
310 – 310S 515 205 40 95 217

Stainless Steel 310 – 310S Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
310 – 310S 7750 200 15.9 16.2 17.0 14.2 18.7 500 720

Equivalent Grades for 310 – 310S Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
310 – 310S S31000/S31008 – – 1.4841/1.4845 – – SUS 310 – 310S

SS 310-310S Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

310-310S Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-27T17:49:48+05:30March 7th, 2022|

Stainless Steel 304H Screw Manufacturers In India

Stainless Steel 304H Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 304H Screw, which can be used in biomedical applications such as implantable components due to its biocompatibility, good fatigue strength and low modulus. Stainless Steel 304H Hex Head Screws is the top choice for any sort of situation where a combination of high strength, light weight, good corrosion resistance and high toughness are required. Altering the interstitial levels tends to enhance certain properties; Stainless Steel 304H Socket Head Cap Screws is a popular alloy where medium strength and good toughness are required. Our process is extensively monitored through every manufacturing step and each furnace load is certified to the standard for metal injection molding of Stainless Steel 304H Socket Set Screws.

Stainless Steel 304H Screw

Machining rating for Stainless Steel 304H Anchors Screws is 22 %, where typically, low cutting speeds, heavy feed rates and copious amounts of cutting fluid are recommended. Stainless Steel 304H Blind Rivet Screws is supplied in the annealed condition for ease of machinability and can be strengthened with a relatively simple heat treatment to offer very high mechanical properties.

Stainless Steel 304H Concrete Screws has fingernail file cutter, tweezers electrical wire cutter striper screwdriver knife bottle opener lever multi tool. Stainless Steel 304H Threaded Screws has strength and light weight structure is skin friendly, 100 % rust proof, none magnetic, also an item neatly tucked away in a survival kit for when a disaster strikes.

Stainless Steel 304H Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

304H Stainless Steel Pipes Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304H min. – – – – – 18.0 – 8.0 –
max. 0.10 2.0 0.75 0.045 0.03 20.0 10.5 –

Stainless Steel 304H Pipe Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304H 515 205 40 92 201

Stainless Steel 304H Pipes Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
304H 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 304H Stainless Steel Pipe

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304H S30409 304S11 58E 1.4948 X5CrNi18-10 2332 SUS 304H

SS 304H Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

304H Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-06T13:07:10+05:30March 7th, 2022|

Stainless Steel 304L Screw Manufacturers In India

Stainless Steel 304L Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 304L Screw, is the lower carbon version of the alloy. Stainless Steel 304L Hex Head Screws was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C). Stainless Steel 304L Socket Head Cap Screws does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. Stainless Steel 304L Socket Set Screws should be considered for applications requiring intermittent heating between 800 Degree F (427 Degree C) and 1650 Degree F (899 Degree C), or for welding under conditions which prevent a post – weld anneal.

Stainless Steel 304L Screw

The high temperature oxidation resistance of Stainless Steel 304L Anchors Screws is similar to that of other stainless steels. Stainless Steel 304L Blind Rivet Screws cannot be hardened by heat treatment, only by cold working. Stainless Steel 304L Concrete Screws can be easily welded and processed by standard shop fabrication practices. Often in many product forms, the grain size and carbon content of Stainless Steel 304L Threaded Screws can meet excellent requirements of clients.

The high corrosion resistance of Stainless Steel 304L Steel Shoulder Screws ensures significantly more uptime than carbon steels and conventional stainless steels, while the mechanical strength allows for lighter constructions, more compact system design and less welding. As their names imply, Stainless Steel 304L Panel Screws consist mainly of one phase, austenite or ferrite.

SS 304L Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

304L Stainless Steel Screw Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304L min. – – – – – 18.0 – 8.0 –
max. 0.03 2.0 1.00 0.045 0.03 20.0 12.0 –

Stainless Steel 304L Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304L 485 170 40 92 201

Stainless Steel 304L Screw Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
304L 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 304L Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304L S30403 304S11 58E 1.4301 X5CrNi18-10 2332 SUS 304L

SS 304L Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

304L Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-05T18:15:44+05:30March 5th, 2022|

Stainless Steel 304 Screw Manufacturers In India

Stainless Steel 304 Screw Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 304 Screw, which has slightly improved corrosion resistance over stainless steel 321 screws in strongly oxidizing environments. Stainless Steel 304 Hex Head Screws is also advantageous for high temperature service because of its good mechanical properties. Stainless Steel 304 Socket Head Cap Screws offers higher creep and stress rupture properties than Stainless Steel 317 Screws, which might also be considered for exposures where sensitization and inter – granular corrosion are concerns.

Stainless Steel 304 Screw

Stainless Steel 304 Socket Set Screws is a columbium (niobium) / tantalum stabilized austenitic chromium – nickel stainless steel which was developed to provide an 18 – 8 type alloy with improved inter – granular – corrosion resistance. Stainless Steel 304 Anchor Screws has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.

Stainless Steel 304 Blind Rivet Screws is the higher carbon (0.04 – 0.10) version of the alloy, which does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. Stainless Steel 304 Concrete Screws was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C). In most instances, the carbon content of Stainless Steel 304 Threaded Screws enables dual certification. Stainless Steel 304 Steel Shoulder Screws can be easily welded and processed by standard shop fabrication practices.

Stainless Steel 304 Screw Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.

304 Stainless Steel Screws Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
304 min. – – – – – 18.0 – 8.0 –
max. 0.08 2.0 0.75 0.045 0.030 20.0 10.5 0.10

Stainless Steel 304 Screw Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
304 515 205 40 92 201

Stainless Steel 304 Screws Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
304 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 304 Stainless Steel Screw

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
304 S30400 304S31 58E 1.4301 X5CrNi18-10 2332 SUS 304

SS 304 Screws Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

304 Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-08T11:56:27+05:30March 5th, 2022|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top