nickel 201 sheet Archives - Steel Pipes/Tubes Manufacturers, Top Pipe Suppliers


 

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Sheets, Plates, Coils, which resists attack from phosphoric acid and have been successfully used with nitric acid. These Nickel 201 Plates is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures. Our Nickel 201 Coils exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite.

Nickel Alloy 201 Sheets Manufacturer In India | Nickel Alloy 201 Sheets Manufacturer In Mumbai | Nickel Alloy 201 Sheets Exporter In India | Nickel Alloy 201 Sheets Exporter In Mumbai | Nickel Alloy 201 Sheets Supplier In India | Nickel Alloy 201 Sheets Supplier In Mumbai | Nickel Alloy 201 Sheets Stockist In India | Nickel Alloy 201 Sheets Stockist In Mumbai
Nickel Alloy 201 Sheets
    Nickel Alloy 201 Sheets

Like steel, these Nickel 201 Slating Coils is a relatively poor conductor of electricity, with significantly lower electrical conductivity than copper. Other metals in contact with our Nickel 201 Perforated Coils, particularly in a damp or acidic environment, may suffer galvanic corrosion even though the stainless metal may be unaffected. These Alloy 201 Sheets is generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel.

Our Alloy 201 Plates is resistant to sulphuric acid at room temperature, even in high concentrations. These Alloy 201 Coils are both useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect steel under such conditions), though it provides the greatest level of resistance to corrosion.

Nickel 201 Sheet, Plate & Coil Specifications

Specifications : ASTM / ASME SB 162
Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Thickness : 0.1mm to 12 mm Thk
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Hardness : Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

Nickel 201 Plate, Sheet & Coil Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel 201 Sheets, Plates & Coils Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Equivalent Grades for 201 Nickel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel 201 2.4068 N02201 NW 2201 NA 12 НП-2 LC-Ni 99

Nickel 201 Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 201 Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Nickel Alloy 201 Sheets
Nickel Alloy 201 Sheets Stockist

Sachiya Steel International Is One Of The Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Sheets, Plates, Coils, which resists attack from phosphoric acid and have been successfully used with nitric acid. These Nickel 201 Plates is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures. Our Nickel 201 Coils exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

We are leading Manufacturers, Supplier, Dealers, and Exporter of Nickel Alloy 201 Pipe in India. Our Nickel Alloy 201 Pipe are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply Nickel Alloy 201 Pipe in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Pipes, Duplex Pipes, Carbon Steel Pipes, Alloys Steel Pipes, Nickel Alloys Pipes, Aluminium Pipes, etc

Nickel Alloy 201 Pipe


Standards Specifications of Nickel Alloy 201 Pipe:


Standards ASTM / ASME
Size 15NB to 150NB In
Length Within 13500mm
Type  Seamless / ERW / Welded / Fabricated / LSAW Pipes
Form Round, Square, Rectangular, Hydraulic Etc.
Mechanical Properties of Nickel 201 Pipe
Density 8.9 g/cm3
Melting Point 1446 °C (2635 °F)
Tensile Strength Psi – 67000 , MPa – 462
Yield Strength (0.2%Offset) Psi – 21500 , MPa – 148
Elongation 45 %
Chemical Composition of Nickel 201 Pipe
Nickel Alloy 201 Ni Fe C Mn Si Cu S
Balance 0.40 max 0.15 max 0.35 max 0.35 max 0.25 max 0.01 max
Types of Nickel 201 Pipe
B163 Nickel 201 Seamless Pipes Arcelor Mittal Make B163 Nickel 201 Welded Pipes
B163 Nickel 201 Tubes ISMT Ltd Make B163 Nickel 201 EFW Pipes
Jindal India Make B163 Nickel 201 Seamless Pipes B163 Nickel 201 Round Pipes
B163 Nickel 201 Square Pipes Tenaris pipes Make B163 Nickel 201 Rectangle Pipes
DMV-Stainless-Italia Make B163 Nickel 201 Polish Pipes B163 Nickel 201 Seamless Tubes
B163 Nickel 201 Welded Tubes Jindal Saw Ltd. Make B163 Nickel 201 Round Tubes
B163 Nickel 201 Square Tubes B163 Nickel 201 Hollow Pipes
Tenaris pipes Make B163 Nickel 201 Bush Pipes B163 Nickel 201 Tubing
Nickel Alloy 201 Pipe Packaging 

Nickel Alloy 201 Pipe may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Nickel Alloy 201 Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

Nickel Alloy 201 Pipe Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Nickel Alloy 201 Pipe Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

  • EN 10204/3.1B
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
Nickel Alloy 201 Pipe Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
Nickel Alloy 201 Pipe Documentation
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)
Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago,Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

 

 

Nickel Alloy 201 Pipe

We are leading Manufacturers, Supplier, Dealers, and Exporter of Nickel Alloy 201 Pipe in India. Our Nickel Alloy 201 Pipe are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply Nickel Alloy 201 Pipe in most of the major Indian cities in more than 20 States.

Product Brand:
Nickel Alloy Pipes

Product In-Stock:
https://schema.org/OutOfStock

Editor's Rating:

5

 


 

We are leading Manufacturers, Supplier, Dealers, and Exporter of Nickel Alloy 200 Pipe in India. Our Nickel Alloy 200 Pipe are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply Nickel Alloy 200 Pipe in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Pipes, Duplex Pipes, Carbon Steel Pipes, Alloys Steel Pipes, Nickel Alloys Pipes, Aluminium Pipes, etc

Nickel Alloy 200 Pipe


Standards Specifications of Nickel Alloy 200 Pipe:


Size Seamless 1/2″ – 10″, Welded 1/2″ – 48″
Grade Nickel 201 (UNS No. N02201)
Form Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes
Length Single Random, Double Random & Required Length
End Plain End, Beveled End, Treaded
Type Seamless / ERW / Welded / Fabricated / CDW
Mechanical Properties of Nickel 200 / UNS N02200 Pipes
Density 8.9 g/cm3
Melting Point 1446 °C (2635 °F)
Tensile Strength Psi – 67000 , MPa – 462
Yield Strength (0.2%Offset) Psi – 21500 , MPa – 148
Elongation 45 %
Chemical Composition of Nickel 200 / UNS N02200 Pipes
Ni 99.0 min
Fe 0.4 max
C 0.15 max
Mn 0.35 max
Si 0.1 max
Cu 0.25 max
Mg
Ti
S 0.01 max
Types of Nickel 200 / UNS N02200 Pipes
Jindal Saw Ltd. Make B161 Nickel 200 Seamless Pipes B161 Nickel 200 Welded Pipes
B161 Nickel 200 Tubes Suraj Limited Make B161 Nickel 200 EFW Pipes
B161 Nickel 200 Seamless Pipes Tenaris Pipes Make B161 Nickel 200 Round Pipes
B161 Nickel 200 Square Pipes Man Industries India Limited Make B161 Nickel 200 Rectangle Pipes
Lalit Pipes and Pipes Limited Make B161 Nickel 200 Polish Pipes B161 Nickel 200 Seamless Tubes
B161 Nickel 200 Welded Tubes zenith steel pipes zenith birla Limited Make B161 Nickel 200 Round Tubes
B161 Nickel 200 Square Tubes ESW PIPE – GERMANY Make B161 Nickel 200 Hollow Pipes
B161 Nickel 200 Bush Pipes B161 Nickel 200 Welded Pipes
Nickel Alloy 200 Pipe Packaging 

Nickel Alloy 200 Pipe may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Nickel Alloy 200 Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

Nickel Alloy 200 Pipe Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Nickel Alloy 200 Pipe Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

  • EN 10204/3.1B
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
Nickel Alloy 200 Pipe Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
Nickel Alloy 200 Pipe Documentation
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)
Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago,Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

 

 

Nickel Alloy 200 Pipe

We are leading Manufacturers, Supplier, Dealers, and Exporter of Nickel Alloy 200 Pipe in India. Our Nickel Alloy 200 Pipe are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply Nickel Alloy 200 Pipe in most of the major Indian cities in more than 20 States.

Product Brand:
Nickel Alloy Pipes

Product In-Stock:
https://schema.org/OutOfStock

Editor's Rating:

5

 

Mumbai

Headquarters


D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007

+91 22 66518863

[email protected][email protected]
LOCATIONS

We Are Everywhere


Nickel Alloy 200 Pipe Manufactures And Suppliers

OUR NETWORK india

MumbaiDelhiChennai


About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.