nickel 201 bolt specification

Nickel Alloy 201 Nuts Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Nuts And Bolts, where annealing should be performed in a reducing atmosphere to retain bright finishes. These Nickel 201 Hex Head Bolts has been found that 0.25 % moisture in hydrogen chloride did not affect corrosion rate in both wet and dry gas at 400 Degree F (205 Degree C). Annealing of our Nickel 201 Hex Head Nuts for periods of 1 hour or more at temperatures above 1700 Degree F (925 Degree C) will result in hardness. Heat treatment for these Nickel 201 Square Bolts, commonly called a dead – soft anneal, is used only in specialized applications such as burst diaphragms because of the low mechanical properties and coarse grain structure produced.

Nickel Alloy 201 Nuts Manufacturer

Dry hydrogen and dissociated ammonia are preferred for our Nickel 201 Square Nuts, but less expensive atmospheres like partially burned natural gas will also provide adequate brightness. Heating in oxidizing atmospheres for these Nickel 201 Eye Bolts at high temperatures should be avoided because of the danger of inter – granular oxidation.

Our Nickel 201 Eye Nuts is sensitive to inter – granular attack from Sulphur and metals such as lead, tin, zinc, and bismuth that have low melting points. Scrupulous care must be exercised in these Nickel 201 Hex Bolts to remove all traces of forming lubricants, marking paints and shop soil prior to heating.

Alloy 201 Bolt/Nut Specifications

Specifications : ASTM B 164 ASME SB 164
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 201 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

201 Nickel Alloy Bolt/Nut Chemical Composition

Nickel 201 Ni C Mo Mn Si Fe P S Cu Cr
Balance 0.15 max 0.35 max 0.35 max 0.40 max 0.01 max 0.25 max

Nickel Alloy 201 Bolt/Nut Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %

Equivalent Grades for 201 Nickel Bolt/Nut

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 201 N02201 2.4068 LC-Ni 99 NW 2201 NA 12 НП-2

Alloy 201 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

201 Nickel Alloy Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-30T16:14:03+05:30March 1st, 2022|Fasteners|

Nickel Alloy 201 Bolts Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Bolts And Nuts, where annealing should be performed in a reducing atmosphere to retain bright finishes. These Nickel 201 Hex Head Bolts has been found that 0.25 % moisture in hydrogen chloride did not affect corrosion rate in both wet and dry gas at 400 Degree F (205 Degree C). Annealing of our Nickel 201 Hex Head Nuts for periods of 1 hour or more at temperatures above 1700 Degree F (925 Degree C) will result in hardness. Heat treatment for these Nickel 201 Square Bolts, commonly called a dead – soft anneal, is used only in specialized applications such as burst diaphragms because of the low mechanical properties and coarse grain structure produced.

Nickel Alloy 201 Bolts Manufacturer In India | Nickel Alloy 201 Bolts Manufacturer In Mumbai | Nickel Alloy 201 Bolts Exporter In India | Nickel Alloy 201 Bolts Exporter In Mumbai | Nickel Alloy 201 Bolts Supplier In India | Nickel Alloy 201 Bolts Supplier In Mumbai | Nickel Alloy 201 Bolts Stockist In India | Nickel Alloy 201 Bolts Stockist In Mumbai
Nickel Alloy 201 Bolts

     Nickel Alloy 201 Bolts

Dry hydrogen and dissociated ammonia are preferred for our Nickel 201 Square Nuts, but less expensive atmospheres like partially burned natural gas will also provide adequate brightness. Heating in oxidizing atmospheres for these Nickel 201 Eye Bolts at high temperatures should be avoided because of the danger of inter – granular oxidation.

Our Nickel 201 Eye Nuts is sensitive to inter – granular attack from Sulphur and metals such as lead, tin, zinc, and bismuth that have low melting points. Scrupulous care must be exercised in these Nickel 201 Hex Bolts to remove all traces of forming lubricants, marking paints and shop soil prior to heating.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 201 Bolt/Nut Specifications
Specifications : ASTM B 164 ASME SB 164
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 201 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
201 Nickel Alloy Bolt/Nut Chemical Composition
Nickel 201 Ni C Mo Mn Si Fe P S Cu Cr
Balance 0.15 max 0.35 max 0.35 max 0.40 max 0.01 max 0.25 max
Nickel Alloy 201 Bolt/Nut Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %
Equivalent Grades for 201 Nickel Bolt/Nut
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 201 N02201 2.4068 LC-Ni 99 NW 2201 NA 12 НП-2
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy 201 Bolt/Nut Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
201 Nickel Alloy Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Nickel Alloy 201 Bolts
Nickel Alloy 201 Bolts Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Nickel Alloy 201 Bolts And Nuts, where annealing should be performed in a reducing atmosphere to retain bright finishes. These Nickel 201 Hex Head Bolts has been found that 0.25 % moisture in hydrogen chloride did not affect corrosion rate in both wet and dry gas at 400 Degree F (205 Degree C).

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2022-01-27T12:56:43+05:30January 27th, 2022|
Go to Top