inconel® alloy 625 bolt strength calculator Archives - Steel Pipes/Tubes Manufacturers, Top Pipe Suppliers


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 625 Nuts And  Bolts, which is superior to many other high temperature alloys under cyclic heating and cooling conditions. Inconel 625 Hex Head Bolts are often used in resistance – welded honeycomb structures for housing engine controls, fuel and hydraulic line tubing. Inconel 625 Hex Head Nuts has excellent seawater pitting and crevice corrosion resistant, where they form a disk – shaped morphology and are coherent with respect to the matrix. In alkaline, fresh water, salt water, neutral salts, and in the air, almost no attack occurs in Inconel 625 Square Bolts.

Inconel 625 Nuts Manufacturer In India | Inconel 625 Nuts Manufacturer In Mumbai | Inconel 625 Nuts Exporter In India | Inconel 625 Nuts Exporter In Mumbai | Inconel 625 Nuts Supplier In India | Inconel 625 Nuts Supplier In Mumbai | Inconel 625 Nuts Stockist In India | Inconel 625 Nuts Stockist In Mumbai
Inconel 625 Nuts
Inconel 625 Nuts Manufacturer

Typical Applications for Inconel 625 Square Nuts include: chemical process equipment handling mixed acids both oxidizing and reducing. Inconel 625 U-Bolts resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Inconel 625 Lock Bolts can be easily welded and processed by standard shop fabrication practices. Inconel 625 Eye Bolts has almost complete freedom from chloride induced stress corrosion cracking.

Inconel 625 Eye Nuts is also used in Reaction vessels, Furnace hardware, Heat exchangers, Gas turbine engine duct work, Sour gas production tubes, Equipment used to produce acid and so on. These Inconel 625 T-Bolts is a nickel – chromium – molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy’s matrix and thereby provide high strength without a strengthening heat treatment.

Alloy 625 Bolt/Nut Specifications

Specifications : ASTM B 446 ASME SB 446
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

625 Inconel Alloy Bolt/Nut Chemical Composition

Grade C Mn Si Fe S Cr2 Al-Ti Ni
625 min. 20.0 58.0
max. 0.10 0.50 0.50 5.0 0.015 23.0 0.40

Inconel Alloy 625 Bolt/Nut Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
625 Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5

Equivalent Grades for 625 Inconel Bolt/Nut

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 625 N06625 NA 21 NiCr22Mo9Nb 2.4856 NC22DNB4M ХН75МБТЮ NCF 625

Alloy 625 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

625 Inconel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Inconel 625 Nuts
Inconel 625 Nuts Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 625 Nuts And  Bolts, which is superior to many other high temperature alloys under cyclic heating and cooling conditions.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 625 Bolts And Nuts, which is superior to many other high temperature alloys under cyclic heating and cooling conditions. Inconel 625 Hex Head Bolts are often used in resistance – welded honeycomb structures for housing engine controls, fuel and hydraulic line tubing. Inconel 625 Hex Head Nuts has excellent seawater pitting and crevice corrosion resistant, where they form a disk – shaped morphology and are coherent with respect to the matrix. In alkaline, fresh water, salt water, neutral salts, and in the air, almost no attack occurs in Inconel 625 Square Bolts.

Inconel 625 Bolts Manufacturer In India | Inconel 625 Bolts Manufacturer In Mumbai | Inconel 625 Bolts Exporter In India | Inconel 625 Bolts Exporter In Mumbai | Inconel 625 Bolts Supplier In India | Inconel 625 Bolts Supplier In Mumbai | Inconel 625 Bolts Stockist In India | Inconel 625 Bolts Stockist In Mumbai
Inconel 625 Bolts
     Inconel 625 Bolts

Typical Applications for Inconel 625 Square Nuts include: chemical process equipment handling mixed acids both oxidizing and reducing. Inconel 625 U-Bolts resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion. Inconel 625 Lock Bolts can be easily welded and processed by standard shop fabrication practices. Inconel 625 Eye Bolts has almost complete freedom from chloride induced stress corrosion cracking.

Inconel 625 Eye Nuts is also used in Reaction vessels, Furnace hardware, Heat exchangers, Gas turbine engine duct work, Sour gas production tubes, Equipment used to produce acid and so on. These Inconel 625 T-Bolts is a nickel – chromium – molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy’s matrix and thereby provide high strength without a strengthening heat treatment.

Alloy 625 Bolt/Nut Specifications

Specifications : ASTM B 446 ASME SB 446
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

625 Inconel Alloy Bolt/Nut Chemical Composition

Grade C Mn Si Fe S Cr2 Al-Ti Ni
625 min. 20.0 58.0
max. 0.10 0.50 0.50 5.0 0.015 23.0 0.40

Inconel Alloy 625 Bolt/Nut Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
625 Psi – 1,35,000 , MPa -930 Psi – 75,000 , MPa – 517 42.5

Equivalent Grades for 625 Inconel Bolt/Nut

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 625 N06625 NA 21 NiCr22Mo9Nb 2.4856 NC22DNB4M ХН75МБТЮ NCF 625

Alloy 625 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

625 Inconel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Inconel 625 Bolts
Inconel 625 Bolts Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Inconel 625 Bolts And Nuts, which is superior to many other high temperature alloys under cyclic heating and cooling conditions. Inconel 625 Hex Head Bolts are often used in resistance – welded honeycomb structures for housing engine controls, fuel and hydraulic line tubing.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Mumbai

Headquarters


D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007

+91 22 66518863

[email protected][email protected]
LOCATIONS

We Are Everywhere


Inconel 625 Bolts Manufacturer

OUR NETWORK india

MumbaiDelhiChennai


About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.