hastelloy fittings Archives - Steel Pipes/Tubes Manufacturers, Top Pipe Suppliers

hastelloy-b2-b3-buttweld-fittings-500x500-3-1.jpg

Sachiya Steel International is a Leading Manufacturer And Exporter of Hastelloy B3 Buttweld Fittings. Meanwhile, these Hastelloy B3 Cross Pipe Fittings (UNS N10675) is an additional member of the nickel – molybdenum family of alloys with excellent resistance to hydrochloric acid at all concentrations and temperatures. Our Hastelloy B3 Bend Pipe Fittings is a Nickel – Molybdenum alloy which gives excellent resistance to hydrochloric acid at all concentrations and temperatures from ambient to high.

These Hastelloy B3 Elbow is used in aircraft, furnace and chemical process components, honeycombs and gas turbine combustion section components. Our Hastelloy B3 Tee Pipe Fittings exhibits extremely high resistance to pure hydrochloric, hydrobromic, and sulfuric acids. Meanwhile, these Hastelloy B3 Reducer are also being offered in customized sizes and shapes to our customers.

Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings

Our Hastelloy B3 Stub End Pipe Fittings, with a minimum nickel content of 72 %, is virtually immune to chloride – ion stress corrosion cracking. These Hastelloy B3 End Cap Pipe Fittings is subject to stress – corrosion cracking in high-temperature, high-strength caustic alkalis. Our Hastelloy B3 End Pipe Cap for such service should be fully stress-relieved at 1650 Degree F / 1 hour or 1450 Degree F / 4 hour (900 Degree C / 1 hour or 790 Degree C / 4 hour) prior to use, and operating stresses should be kept to a minimum.

Hastelloy B3 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Hastelloy B3 Pipe Fittings Chemical Composition

Hastelloy B3 Ni C Mo Mn Si Fe Cu Ti Co Cr
65.0 min 0.01 max 28.5 3.0 max 0.10 max 1.5 0.20 max 0.2 max 3.0 max 1.5

Equivalent Grades for B3 Hastelloy Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy B3 N010675 2.4600

Hastelloy Alloy B3 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B3 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy B3 Buttweld Fittings
Hastelloy B3 Buttweld Fittings Manufacturer

Sachiya Steel International is a Leading Manufacturer And Exporter of Hastelloy B3 Buttweld Fittings.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

1_6dbTbi3qonztGNGrTwr4rw.jpg

 

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy X Buttweld Fittings in a wide range, which is engineered with precision by our skilled professionals who make sure to use premium stainless steel in the manufacturing process. Hastelloy X Reducer Pipe Fittings (UNS N06002) is a nickel – chromium – iron – molybdenum super – alloy with outstanding high temperature strength, oxidation resistance, and fabricability. Hastelloy X Bend Pipe Fittings has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications.

Hastelloy X Elbow Pipe Fittings is recommended especially for use in furnace applications because it has unusual resistance to oxidizing, reducing, and neutral atmospheres. Hastelloy X Tee Pipe Fittings exhibits good formability, weldability, and machinability. Meanwhile, these Hastelloy X Cross Pipe Fittings are also being offered in customized sizes and shapes to our customers. Pre – heating of Hastelloy X Stub End is not required, except for very heavy section thickness welds or heavily constrained welds. Post – heating of Hastelloy X End Cap Pipe Fittings is not required but a stress relief anneal, after welding of thick sections or greater, is desirable.

Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings

However, Hastelloy X Dish Cap Pipe Fittings may be used in the as welded condition, which further can be welded together to achieve longer lengths. The superior combination of ductility and fracture toughness makes Hastelloy X End Pipe Cap a great choice for high operating pressures or more depending on wall thickness.

Hastelloy X Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Hastelloy X Pipe Fittings Chemical Composition

Hastelloy X Ni C Mo Mn Si Fe Cu Ti Co Cr
Balance 0.05-0.15 8.0-10.0 1.0 max 1.0 max 17.0-20.0 0.50 max 0.15 max 0.5-2.5 20.5-23.0

Equivalent Grades for X Hastelloy Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy X N06002 2.4665

Hastelloy Alloy X Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy X Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy X Buttweld Fittings
Hastelloy X Buttweld Fittings Manufacturer

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy X Buttweld Fittings in a wide range, which is engineered with precision by our skilled professionals who make sure to use premium stainless steel in the manufacturing process.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

hastelloy-b2-b3-buttweld-fittings-500x500-2-1.jpg

 

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B3 Buttweld Fittings. Meanwhile, these Hastelloy B3 Cross Pipe Fittings (UNS N10675) is an additional member of the nickel – molybdenum family of alloys with excellent resistance to hydrochloric acid at all concentrations and temperatures. Our Hastelloy B3 Bend Pipe Fittings is a Nickel – Molybdenum alloy which gives excellent resistance to hydrochloric acid at all concentrations and temperatures from ambient to high.

These Hastelloy B3 Elbow is used in aircraft, furnace and chemical process components, honeycombs and gas turbine combustion section components. Our Hastelloy B3 Tee Pipe Fittings exhibits extremely high resistance to pure hydrochloric, hydrobromic, and sulfuric acids. Meanwhile, these Hastelloy B3 Reducer are also being offered in customized sizes and shapes to our customers. Our Hastelloy B3 Stub End Pipe Fittings, with a minimum nickel content of 72 %, is virtually immune to chloride – ion stress corrosion cracking.

Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings | Hastelloy B3 Buttweld Fittings

These Hastelloy B3 End Cap Pipe Fittings is subject to stress – corrosion cracking in high-temperature, high-strength caustic alkalis. Our Hastelloy B3 End Pipe Cap for such service should be fully stress-relieved at 1650 Degree F / 1 hour or 1450 Degree F / 4 hour (900 Degree C / 1 hour or 790 Degree C / 4 hour) prior to use, and operating stresses should be kept to a minimum.

Hastelloy B3 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Hastelloy B3 Pipe Fittings Chemical Composition

Hastelloy B3 Ni C Mo Mn Si Fe Cu Ti Co Cr
65.0 min 0.01 max 28.5 3.0 max 0.10 max 1.5 0.20 max 0.2 max 3.0 max 1.5

Equivalent Grades for B3 Hastelloy Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy B3 N010675 2.4600

Hastelloy Alloy B3 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B3 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy B3 Buttweld Fittings
Hastelloy B3 Buttweld Fittings Manufacturer

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B3 Buttweld Fittings. Meanwhile, these Hastelloy B3 Cross Pipe Fittings (UNS N10675) is an additional member of the nickel – molybdenum family of alloys with excellent resistance to hydrochloric acid at all concentrations and temperatures.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

hastelloy-c276-buttweld-pipe-fittngs-500x500-1.jpg

 

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy C276 Buttweld Fittings to the esteemed clients. Hastelloy C276 Elbow Butt Weld Pipe Fittings (UNS N10276) is a nickel – molybdenum – chromium super – alloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. Sachiya Steel International is one of the well – known trader and dealer of Hastelloy C276 Tee Butt Weld Pipe Fittings, which is used in chemical process equipment and desulfurization of flue gas equipment. Hastelloy C276 Cross Butt Weld Pipe Fittings has excellent corrosion resistance in a wide range of corrosive media including, Sulphur compounds and chloride ions.

Hastelloy C276 Pipe Reducer is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process applications in an as welded condition. Meanwhile, these Hastelloy C276 Pipe Bend are also being offered in customized sizes and shapes to our customers.

Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings

The addition of a small percentage of the alloying elements under consideration makes Hastelloy C276 Stub End Butt Weld Pipe Fittings possible to retard the transformation more effectively and hence to produce better physical properties. By increasing the content of nickel, the transformation range of Hastelloy C276 End Pipe Cap is finally lowered to a point below normal atmospheric temperature.

Hastelloy C276 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Hastelloy C276 Pipe Fittings Chemical Composition

Hastelloy C276 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.01 max 15 – 17 1.0 max 0.08 max 4 – 7 0.04 max 0.03 max 2.5 max 14.5 – 16.5

Hastelloy C276 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.89 g/cm3 1370 °C (2500 °F) Psi – 52,000 , MPa – 355 Psi – 1,15,000 , MPa – 790 40 %

Equivalent Grades for C276 Hastelloy Pipe Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS OR GOST
Hastelloy C276 N10276 2.4819 NiMo16Cr15W NW 0276 ЭП760 ХН65МВУ

Hastelloy Alloy C276 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C276 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy C276 Buttweld Fittings
Hastelloy C276 Buttweld Fittings Manufacturer

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy C276 Buttweld Fittings to the esteemed clients.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

hastelloy-b2-b3-buttweld-fittings-500x500-1.jpg

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B2 Buttweld Fittings, which is available in different sizes and shapes. Meanwhile, Hastelloy B2 Elbow Butt Weld Pipe Fittings (UNS N10665) has great resistance to stress – corrosion cracking and pitting. These Hastelloy B2 Tee Butt Weld Pipe Fittings has significantly lower carbon, silicon and iron compared to its’ predecessor, Alloy B (UNS N10001), making the alloy less susceptible to decreased corrosion resistance in the weld zone, in the as – welded condition. Our Hastelloy B2 Pipe Reducer has excellent resistance to all temperatures and concentrations of hydrochloric acid.

These Hastelloy B2 Cross Butt Weld Pipe Fittings has resistant to stress corrosion cracking and pitting. Our Hastelloy B2 Bend is used for most chemical process applications in the welded condition. Meanwhile, these Hastelloy B2 Stub End Butt Weld Pipe Fittings are also being offered in customized sizes and shapes to our customers. Our Hastelloy B2 Dish Cap Butt Weld Pipe Fittings provides supreme resistance to stress corrosion cracking to the boiling magnesium chloride test.

Hastelloy B2 Buttweld Fittings| Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings

These Hastelloy B2 End Cap Butt Weld Pipe Fittings is a completely austenitic corrosion resistant alloy that offers excellent resistance to aqueous and high temperature corrosion. Chromium content in our Hastelloy B2 Concentric Reducer Pipe Fittings prevents attack in the oxidizing conditions and molybdenum and tungsten resist wet reducing attack.

Hastelloy B2 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Hastelloy B2 Pipe Fittings Chemical Composition

Hastelloy B2 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.02 max 26.0-30.0 1.0 max 0.10 max 2.0 max 0.040 max 0.030 max 1.0 max 1.0 max

Hastelloy B2 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi – 51,000, MPa – 350 Psi -1,10,000, MPa -760 40 %

Equivalent Grades for B2 Hastelloy Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy B2 N10665 2.4617

Hastelloy Alloy B2 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B2 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy B2 Buttweld Fittings
Hastelloy B2 Buttweld Fittings Manufacturer

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B2 Buttweld Fittings, which is available in different sizes and shapes.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

stainless-steel-buttweld-fittigs-1.jpg

 

Sachiya Steel International is leading manufacturer and exporter of Hastelloy C22 Buttweld Fittings to the esteemed clients, which has some excellent features to offer such as precise dimensions, excellent finishing, optimum material strength and more. Hastelloy C22 Elbow Pipe Fittings (UNS N06022) is extremely resistant to corrosion in oxidizing and reducing environments. The high chromium content in Hastelloy C22 Tee Pipe Fittings provides good resistance to oxidizing media. The molybdenum and tungsten content in Hastelloy C22 Cross Pipe Fittings gives good resistance to reducing media.

Hastelloy C22 Reducer also withstands sulphuric, acetic, formic and phosphoric acids and other non – oxidizing media. Meanwhile, these Hastelloy C22 Bend Pipe Fittings are also being offered in customized sizes and shapes to our customers, where we also offer the same at market leading rates. Hastelloy C22 Stub End should not be used in service temperatures above 1250 Degree F due to the formation of detrimental phases which form above this temperature. Hastelloy C22 End Cap Pipe Fittings is a versatile austenitic nickel – chromium – molybdenum – tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking.

Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings

Although ductile enough to be formed by cold working, intermediate annealing of Hastelloy C22 End Pipe Cap may be necessary due to work hardening. Forging in Hastelloy C22 Lateral Tee Pipe Fittings should be performed between the ranges of 1750 Degree F – 2050 Degree F, followed by rapid cooling.

Hastelloy C22 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
: ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Hastelloy C22 Pipe Fittings Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max

Hastelloy C22 Buttweld Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Equivalent Grades for C22 Hastelloy Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 NiCr21Mo14W

Hastelloy Alloy C22 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C22 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Hastelloy C22 Buttweld Fittings
Hastelloy C22 Buttweld Fittings Manufacturer

Sachiya Steel International is leading manufacturer and exporter of Hastelloy C22 Buttweld Fittings to the esteemed clients, which has some excellent features to offer such as precise dimensions, excellent finishing, optimum material strength and more.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

We are leading Manufacturers, Supplier, Dealers, and Exporter of Hastelloy C276 Tubes in India. Our Hastelloy C276 Tubes is available in different sizes, shapes, and grades. We supply Hastelloy C276 Tubes in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel tubes, Super Duplex Steel Tubes, Duplex Steel Tubes, Carbon Steel tubes, Alloys Steel tubes, Nickel Alloys tubes, Titanium Steel tubes, Inconel Steel tubes, Aluminium tubes, etc.

Hastelloy C276 Tubes


Hastelloy C276 Tubes Specification::

Specifications : ASTM B619, B622 / ASME SB619, SB622
Dimensions : ASTM, ASME, and API
Alloy C276 Tubes Size
: 6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thick.
Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Type : Seamless / ERW / Welded / Fabricated / LSAW Tubes
Form : Round, Square, Rectangular, Hydraulic Etc
Length : Single Random, Double Random & Cut Length.
End :
Plain End, Beveled End, Treaded
Types of Hastelloy Alloy C276 Tubes
Hastelloy C276 Tubes Suppliers And Manufactures Hastelloy C276 Seamless Tube Alloy C276 Seamless Tubes
C276 Alloy Seamless Tube
Hastelloy Alloy C276 Seamless Tubes
GOST ХН65МВУ Seamless Tubes
UNS N10276 Seamless Tube
WERKSTOFF NR. 2.4819 Seamless Tubes
ASME SB622 C276 Hastelloy Seamless Tube
Hastelloy C276 Tubes Suppliers And Manufactures Hastelloy Alloy C276 Welded Tube Alloy C276 Welded Tubes
C276 Alloy Welded Tube
Hastelloy Alloy C276 Welded Tubes
Hastelloy UNS N10276 Welded Tube
Alloy WERKSTOFF NR. 2.4819 Welded Tubes
ASTM B619 C276 Hastelloy Welded Tubes
Hastelloy C276 Tubes Suppliers And Manufactures Alloy C276 Round Tubes C276 Alloy Round Tube
C276 Hastelloy Alloy Round Tubes
Hastelloy C276 Round Tube
GOST ХН65МВУ Seamless Tubes
UNS N10276 Round Tubes
Alloy C276 Round Tube
ASME SB622 C276 Hastelloy Round Tubes
 Hastelloy C22 Decorative Tubes Hastelloy C22 Decorative Tube Alloy C276 Decorative Tubes
C276 Alloy Decorative Tube
Hastelloy Alloy C276 Decorative Tubes
UNS N10276 Decorative Tube
GOST ХН65МВУ Seamless Tubes
WERKSTOFF NR. 2.4819 Decorative Tubes
ASME SB622 C276 Hastelloy Decorative Tube
 Hastelloy C22 Polish Tubes Hastelloy C276 Polish Tube Alloy C276 Polish Tubes
GOST ХН65МВУ Seamless Tubes
C276 Alloy Polish Tube
Hastelloy Alloy C276 Polish Tubes
UNS N10276 Polish Tube
WERKSTOFF NR. 2.4819 Polish Tubes
ASME SB622 C276 Hastelloy Polish Tube
 Hastelloy C22 Instrumentation Tubes Hastelloy C276 Instrumentation Tube Alloy C276 Instrumentation Tubes
C276 Alloy Instrumentation Tube
Hastelloy Alloy C276 Instrumentation Tubes
GOST ХН65МВУ Seamless Tubes
UNS N10276 Instrumentation Tube
WERKSTOFF NR. 2.4819 Instrumentation Tubes
ASME SB622 C276 Hastelloy Instrumentation Tube
 Hastelloy C22 Heat exchanger Tube Hastelloy C276 Heat Exchanger Tube Alloy C276 Heat Exchanger Tubes
C276 Alloy Heat Exchanger Tube
Hastelloy Alloy C276 Heat Exchanger Tubes
UNS N10276 Heat Exchanger Tube
WERKSTOFF NR. 2.4819 Heat Exchanger Tubes
ASME SB622 C276 Hastelloy Heat Exchanger Tube
C276 Hastelloy Alloy Tube Chemical Composition
Hastelloy C276 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.010 max 15.00 – 17.00 1.00 max 0.08 max 4.00 – 7.00 0.04 max 0.03 max 2.5 max 14.50 – 16.50
Hastelloy C276 Tubing Mechanical Properties
Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.89 g/cm3 1370 °C (2500 °F) Psi – 52,000 , MPa – 355 Psi – 1,15,000 , MPa – 790 40 %
Equivalent Grades for C276 Hastelloy Seamless and Welded Tubes
STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Hastelloy C276 N10276 2.4819 NiMo16Cr15W NW 0276 ХН65МВУ
Hastelloy C276 Tubes Packaging 

Hastelloy C276 Tubes may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Hastelloy C276 Tubes may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

Hastelloy C276 Tubes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Hastelloy C276 Tubes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance with EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRITE CONTENT as per norms if requested by clients.

  • EN 10204/3.1B
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third-Party Inspection Report, etc
Hastelloy C276 Tubes Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
Documentation
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)
Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago, Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

 

Hastelloy C276 Tubes

We are leading Manufacturers, Supplier, Dealers, and Exporter of Hastelloy C276 Tubes in India. Our Hastelloy C276 Tubes is available in different sizes, shapes, and grades. We supply Hastelloy C276 Tubes in most of the major Indian cities in more than 20 States.

Product Brand:
Hastelloy Tubes

Product In-Stock:
https://schema.org/OutOfStock

Editor's Rating:

5

 


 

We are leading Manufacturers, Supplier, Dealers, and Exporter of Hastelloy C276 Pipe in India. Our Hastelloy C276 Pipe are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply Hastelloy C276 Pipe in most of the major Indian cities in more than 20 States. We Sachiya Steel International offer different types of grades like Stainless Steel Pipes, Super Duplex Pipes, Duplex Pipes, Carbon Steel Pipes, Alloys Steel Pipes, Nickel Alloys Pipes, Aluminium Pipes, etc.

Hastelloy C276 Pipe


Standard Specifictaion of Hastelloy C276 Pipe:


Standard ASTM, ASME B 622, B 619, B 775, B 516, B 626
Type Seamless / ERW / Welded / Fabricated / LSAW Pipes
Size 15NB TO 150 NB IN
Form Round, Square, Rectangular, Hydraulic Etc.
Length Single Random, Double Ranidom & Cut Length
End Plain End, Bevelled End, Treaded
Chemical Composition of Hastelloy C276 Pipe
Carbon 0.01 max
Chromium 14.5 – 16.5
Cobalt 2.5 max
Iron 4 – 7
Manganese 1 max
Molybdenum 15 – 17
Phosphorus 0.015 max
Silicon 0.08 max
Sulphur 0.01 max
Tungsten 3 – 4.5
Vanadium 0.35 max
Nickel Balance
Mechanical & Physical Properties of Hastelloy C276 Pipe
Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.89 g/cm3 1370 °C (2550 °F) Psi – 1,15,000 , MPa –790 Psi – 52,000 , MPa – 355 40 %
Types of Hastelloy C276 Pipe
Tata Steel Make Hastelloy C276 Seamless Pipe Hastelloy C276 Welded Pipe
Hastelloy C276 Fabricated Pipe ISMT Ltd Make Hastelloy C276 EFW Pipe
Tata Tubes Make Hastelloy C276 ERW Pipe Hastelloy C276 Round Pipe
Hastelloy C276 Square Pipe Maharashtra Seamless Ltd Make Hastelloy C276 Rectangle Pipe
Hastelloy C276 Polish Pipe Ratnamani Metals Tubes Ltd-Ratnamani-Pipes Make Hastelloy C276 Seamless Tubes
Tubacex Pipes Make Hastelloy C276 Welded Tubes Hastelloy C276 Round Tubes
Mukat Pipes Limited Make Hastelloy C276 Square Tubes Hastelloy C276 Hollow Pipe
Hastelloy C276 Bush Pipe ESW PIPE – GERMANY Make Hastelloy C276 Tube Co
Hastelloy C276 Electro Polish Tube Tenaris pipes Make Hastelloy C276 Electro Polish Tube

Hastelloy C276 Pipe may be furnished bare or coated and with capped ends. pipes up to 3” OD will be supplied in bundles. In order to prevent rust during sea shipment, bundles of Hastelloy C276 Pipe may be wrapped with polypropylene sheets, and secured with flat steel bands. Over 3” OD will be supplied loose.

Hastelloy C276 Pipe Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Hastelloy C276 Pipe Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

  • EN 10204/3.1B
  • Raw Materials Certificate
  • 100% Radiography Test Report
  • Third Party Inspection Report, etc
Hastelloy C276 Pipe Material Testing:

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

  • Mechanical Testing Such as Tensile of Area
  • Hardness Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flattening Test
  • Micro and MacroTest
  • Pitting Resistance Test
  • Flaring Test
  • Intergranular Corrosion (IGC) Test
Hastelloy C276 Pipe Documentation
  • Commercial Invoice which includes HS Code
  • Packing List including net weight and gross weight, number of boxes, Marks and Numbers
  • Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
  • Fumigation Certificates
  • Raw Material Test Reports
  • Material Traceability Records
  • Quality Assurance Plan (QAP)
  • Heat Treatment Charts
  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
  • Form A for the purposes of the Generalized System of Preferences (GSP)
Country’s We Export

Venezuela, Iraq, United Kingdom, Russia, United Arab Emirates, Croatia, Indonesia, Oman, Kazakhstan, Israel, Kenya, Iran, Bahrain, Bhutan, Colombia, Serbia, Pakistan, Czech Republic, Turkey, Ukraine, Poland, Bulgaria, France, Chile, Slovakia, Belgium, Iran, Ireland, Qatar, Sri Lanka, Sweden, Brazil, Bolivia, Taiwan, Jordan, South Africa, Switzerland, Tibet, Norway, India, Ghana, Costa Rica, Hungary, New Zealand, Vietnam, Ecuador, Afghanistan, Algeria, Peru, Netherlands, Argentina, Austria, Malaysia, Thailand, Portugal, Zimbabwe, Mongolia, Lebanon, Trinidad & Tobago,Tunisia, Mexico, Greece, Angola, Hong Kong, Denmark, Nepal, Finland, Chile, Poland, Yemen, Nigeria, Italy, Bangladesh, Australia, Macau, Azerbaijan, Saudi Arabia, Japan, Gabon, Philippines, Singapore, United States, Namibia, Romania, South Korea, Germany, Puerto Rico, Estonia, Morocco, Belarus, Nigeria, Mexico, Spain, China, Canada, Libya, Lithuania, Kuwait, Gambia, Egypt.

 

 

Hastelloy C276 Pipe

We are leading Manufacturers, Supplier, Dealers, and Exporter of Hastelloy C276 Pipe in India. Our Hastelloy C276 Pipe are available in different sizes, shapes, and grades and specifications as per the clients requirements. We supply Hastelloy C276 Pipe in most of the major Indian cities in more than 20 States.

Product Brand:
Hastelloy Pipes

Product In-Stock:
https://schema.org/OutOfStock

Editor's Rating:

5


Mumbai

Headquarters


D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007

+91 22 66518863

[email protected][email protected]
LOCATIONS

We Are Everywhere


Hastelloy C276 Pipe Manufacturer And Supplier

OUR NETWORK india

MumbaiDelhiChennai


About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.