Sachiya Steel International

Female Fittings connectors

Monel Alloy 400 Tube to Female Pipes Manufactures In India

Monel Alloy 400 Tube to Female Pipes Manufactures In India

Sachiya Steel International is one of the prominent Manufacture And Exporter of quality Monel Alloy 400 Tube to Female Pipes, which has good ductility and thermal conductivity. A low corrosion rate of Monel 400 Tube Fittings in rapidly flowing brackish or seawater is combined with excellent resistance to stress – corrosion cracking in most freshwaters. Resistance of Monel 400 Compression Fittings to a variety of corrosive conditions led to its wide use in marine applications and other non – oxidizing chloride solutions.

Monel 400 Female Connector Fittings is a Nickel – Copper alloy with high strength and excellent corrosion resistance in a range of acidic and alkaline environments and especially suitable for reducing conditions. The commercially available pure nickel, as Monel 400 Ferrule Tube Fittings, exhibits excellent corrosion resistance in reduced environments. The characteristics of Monel 400 Double Ferrule Tube Fittings include corrosion resistance in an extensive range of marine and chemical environments.

Monel Alloy 400 Tube to Female Pipes

Monel 400 Compression Tube Fittings is particularly resistant to hydrochloric and hydrofluoric acids when they are de – aerated. As would be expected from its high copper content, Alloy 400 Female Connector Fittings is rapidly attacked by nitric acid and ammonia systems. The product differentiation is based on the premier finish of Alloy 400 Ferrule Tube Fittings with minimum burr at the edge. The ends for perfect welding and fabrication of Alloy 400 Double Ferrule Tube Fittings are used in mega projects in oil and gas industry for long life of the product.

Monel Alloy 400 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
 : 3000 – 4000 PSI
Applicable Temperature
 : 150-400 C
Type
 : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.

400 Monel Alloy Tube to Female Pipes Fitting Chemical Composition

Monel 400 Ni C Al Mn Si Fe Cu S Co Cr
63.0 min 0.3 max 0.50 max 2.0 max 0.5 max 1.0 – 2.5 28.0 – 34.0 0.02 max – –

Monel Alloy 400 Tube to Female Pipes Fitting Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.8 g/cm3 1350 °C (2460 °F) Psi – 35,000 , MPa – 240 Psi – 80,000 , MPa – 550 40 %

Equivalent Grades for 400 Monel Tube to Female Pipes Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Monel 400 N04400 2.4360 NU-30M NiCu30Fe NW 4400 NA 13 МНЖМц 28-2,5-1,5

Monel Alloy 400 Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel 400 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-19T13:01:12+05:30July 15th, 2021|

Hastelloy X Tube to Female Pipes Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy X Tube to Female Pipes, which is non – magnetic cobalt based super – alloy, and not significantly harden able. High Strength Hastelloy X Tube Fittings has a well – documented history in pressure vessel applications particularly in Submarine hull construction. Under arduous working conditions, Hastelloy X Compression Fittings has to have excellent low cycle fatigue properties and in conjunction with a high resistance to crack propagation.

The general level of corrosion resistance in Hastelloy X Female Connector Fittings is best in the fully hardened condition, and decreases slightly as the aging temperature is increased. Hastelloy X Ferrule Fittings may also be used in the solution treated condition or heat-treated to obtain a wide variety of properties. Hastelloy X Double Ferrule Fittings is used in aerospace, aircraft components, fabricated parts in high – pressure corrosive environments including valves, shafts, fasteners, fittings and gears.

Hastelloy X Tube to Female Pipes | Hastelloy X Tube to Female Pipes | Hastelloy X Tube to Female Pipes | Hastelloy X Tube to Female Pipes | Hastelloy X Tube to Female Pipes | Hastelloy X Tube to Female Pipes | Hastelloy X Tube to Female Pipes | Hastelloy X Tube to Female Pipes | Hastelloy X Tube to Female Pipes

Alloy X Female Connector Tube Fittings maintains good strength up to 2150 Degree F, which requires minimum yield strength at room temperature. Alloy X Compression Tube Fittings maintains good oxidation resistance up to 1900 Degree F. Alloy X Ferrule Tube Fittings has highly resistant to hydrochloric acid, nitric acid and wet chlorine (subject to need for exercising care in its selection at certain concentrations and temperatures). Alloy X Double Ferrule Tube Fittings has a unique ability to resist corrosion in very severe environments.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy X Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
 : 3000 – X0 PSI
Applicable Temperature
 : 150-400 C
Type
 : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

X Hastelloy Alloy Tube to Female Pipes Fitting Chemical Composition

Hastelloy X Ni C Mo Mn Si Fe Cu Ti Co Cr
Balance 0.05-0.15 8.0-10.0 1.0 max 1.0 max 17.0-20.0 0.50 max 0.15 max 0.5-2.5 20.5-23.0

Hastelloy Alloy X Tube to Female Pipes Fitting Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
– – – – –

Equivalent Grades for X Hastelloy Tube to Female Pipes Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy X N06002 2.4665
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy Alloy X Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy X Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy X Tube to Female Pipes
tube adapters 1

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy X Tube to Female Pipes, which is non – magnetic cobalt based super – alloy, and not significantly harden able

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-07-15T15:27:45+05:30July 15th, 2021|

Hastelloy B3 Tube to Female Pipes Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy B3 Tube to Female Pipes, which is available in different sizes and shapes for our clients. Hastelloy B3 Tube Fittings was the first wrought, nickel – chromium – molybdenum material to alleviate concerns over welding (by virtue of extremely low carbon and silicon contents). As such, Hastelloy B3 Compression Tube Fittings was widely accepted in the chemical process and associated industries, and now has a track record of proven performance in a vast number of corrosive chemicals.

Like other nickel alloys, Hastelloy B3 Ferrule Tube Fittings is ductile, easy to form and weld, and possesses exceptional resistance to stress corrosion cracking in chloride – bearing solutions (a form of degradation to which the austenitic stainless steels are prone). With its high chromium and molybdenum contents, Hastelloy B3 Double Ferrule Tube Fittings is able to withstand oxidizing and non – oxidizing acids, and exhibits outstanding resistance to pitting and crevice attack in the presence of chlorides and other halides. Furthermore, Hastelloy B3 Female Connector Fittings is very resistant to sulphide stress cracking and stress corrosion cracking in sour, oilfield environments.

Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes | Hastelloy B3 Tube to Female Pipes

One of the chief attributes of Alloy B3 Female Connector Tube Fittings is their resistance to chloride – induced stress corrosion cracking. When traditional SS 316L has failed, and AL-6XN has reached its material design limit, then these Alloy B3 Tube Fittings is the best option.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B3 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
 : 3000 – B30 PSI
Applicable Temperature
 : 150-400 C
Type
 : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

B3 Hastelloy Alloy Tube to Female Pipes Fitting Chemical Composition

Hastelloy B3 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.02 max 26.0-30.0 1.0 max 0.10 max 2.0 max 0.040 max 0.030 max 1.0 max 1.0 max

Hastelloy Alloy B3 Tube to Female Pipes Fitting Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi – 51,000, MPa – 350 Psi -1,10,000, MPa -760 40 %

Equivalent Grades for B3 Hastelloy Tube to Female Pipes Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy B3 N010675 2.4600
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy Alloy B3 Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B3 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B3 Tube to Female Pipes
0 removebg preview

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Hastelloy B3 Tube to Female Pipes, which is available in different sizes and shapes for our clients.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-07-14T13:15:27+05:30July 14th, 2021|

Hastelloy B2 Tube to Female Pipes Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

Sachiya Steel International is one of the well – known Manufacture and Exporter of Hastelloy B2 Tube to Female Pipes, which is suitable for the device maintenance in the reduction and chemical conditions. The operations Hastelloy B2 Tube Fittings are used in the chemical processing include handling sulphuric acid, phosphoric acid, hydrochloric acid and acetic acid. The operation temperatures in Hastelloy B2 Compression Fittings vary from the ambient to 1500 Degree F on the base of environments.

Hastelloy B2 Female Connector Fittings has superior resistance to hydrochloric acid, aluminum chloride catalyst and other powerful reduction chemicals. Nickel – Cobalt alloys such as Hastelloy B2 Ferrule Fittings offering resistance to corrosion at high temperature and wearing resistance are categorized as intermediate toward tough while machining, however it is stated that the alloys are machined inexpensively.

Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes

The apparatus of Hastelloy B2 Double Ferrule Tube Fittings should be very sharp during operation, whereas for this, the tools should be changed after certain time use. Alloy B2 Compression Tube Fittings prevents the production of grain boundary carbides in the weld HAZ, therefore it’s as – welded form is suitable for use in the chemical processing environments. The availability of carbon, silicon and iron elements tends to lower reduction rate of corrosion resistance property of Alloy B2 Female Connector Tube Fittings in welded form. Hastelloy B2 Ferrule Tube Fittings has outstanding elevated temperature stability in the inert and vacuum conditions.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B2 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
 : 3000 – B20 PSI
Applicable Temperature
 : 150-400 C
Type
 : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

B2 Hastelloy Alloy Tube to Female Pipes Fitting Chemical Composition

Hastelloy B2 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.02 max 26.0-30.0 1.0 max 0.10 max 2.0 max 0.040 max 0.030 max 1.0 max 1.0 max

Hastelloy Alloy B2 Tube to Female Pipes Fitting Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi – 51,000, MPa – 350 Psi -1,10,000, MPa -760 40 %

Equivalent Grades for B2 Hastelloy Tube to Female Pipes Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy B2 N10665 2.4617
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy Alloy B2 Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B2 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B2 Tube to Female Pipes
0 removebg preview

Sachiya Steel International is one of the well – known Manufacture and Exporter of Hastelloy B2 Tube to Female Pipes, which is suitable for the device maintenance in the reduction and chemical conditions.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-07-14T12:54:59+05:30July 14th, 2021|

Hastelloy C276 Tube to Female Pipes Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the prominent Manufacture and Exporter of Hastelloy C276 Tube to Female Pipes, which is particularly resistant to pitting and crevice corrosion. Hastelloy C276 Tube Fittings has been used extensively to protect against the most corrosive FGD systems and the most sophisticated pharmaceutical reaction vessels. Hastelloy C276 Compression Fittings has been very successful as phosphoric acid heat exchanger tubing and for other process components in the fertilizer industry. Hastelloy C276 Female Connector Fittings is a new Ni – Cr – Mo alloy with superior resistance to hydrochloric and sulphuric acids, without the drawbacks of the Ni – Mo and Zr materials.

The resistance of Hastelloy C276 Ferrule Fittings to these key chemicals is much greater than that of the popular Ni – Cr – Mo alloys. Hastelloy C276 Double Ferrule Fittings has the outstanding resistance to pitting and crevice attack in chloride salt solutions. Alloy C276 Female Connector Tube Fittings even withstands high levels of oxidizing impurities that the Ni – Mo alloys cannot cope with. Alloy C276 Compression Tube Fittings has same excellent resistance to hydrochloric acid and other strongly reducing chemicals as B-2 alloy.

Hastelloy C276 Tube to Female Pipes | Hastelloy C276 Tube to Female Pipes | Hastelloy C276 Tube to Female Pipes | Hastelloy C276 Tube to Female Pipes | Hastelloy C276 Tube to Female Pipes | Hastelloy C276 Tube to Female Pipes | Hastelloy C276 Tube to Female Pipes | Hastelloy C276 Tube to Female Pipes | Hastelloy C276 Tube to Female Pipes | Hastelloy C276 Tube to Female Pipes

Alloy C276 Ferrule Tube Fittings has significantly better thermal stability, fabricability and stress corrosion cracking resistance than B2 alloy. High – temperature stability of Alloy C276 Double Ferrule Tube Fittings in the 1200 Degree F – 1900 Degree F (650 Degree C – 1040 Degree C) range as evidenced by good ductility and corrosion resistance.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C276 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
 : 3000 – C2760 PSI
Applicable Temperature
 : 150-400 C
Type
 : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

C276 Hastelloy Alloy Tube to Female Pipes Fitting Chemical Composition

Hastelloy C276 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.01 max 15 – 17 1.0 max 0.08 max 4 – 7 0.04 max 0.03 max 2.5 max 14.5 – 16.5

Hastelloy Alloy C276 Tube to Female Pipes Fitting Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.89 g/cm3 1370 °C (2500 °F) Psi – 52,000 , MPa – 355 Psi – 1,15,000 , MPa – 790 40 %

Equivalent Grades for C276 Hastelloy Tube to Female Pipes Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS OR GOST
Hastelloy C276 N10276 2.4819 – NiMo16Cr15W NW 0276 ЭП760 ХН65МВУ
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy Alloy C276 Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C276 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C276 Tube to Female Pipes
hastelloy c276 tube fitting 1

Sachiya Steel International is one of the prominent Manufacture and Exporter of Hastelloy C276 Tube to Female Pipes, which is particularly resistant to pitting and crevice corrosion.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-07-12T11:36:03+05:30July 12th, 2021|

Hastelloy C22 Tube to Female Pipes Manufacture

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of pioneer Manufacture and Exporter for Hastelloy C22 Tube to Female Pipes, which has shown moderate to poor resistance to hydrochloric acid. In sulphuric acid, Hastelloy C22 Tube Fittings has shown useful resistance to concentrations of up to about 30 % at a temperature of 175 Degree F and about 10 % at boiling temperature. Laboratory tests of Hastelloy C22 Compression Fittings at 175 Degree F have produced corrosion rates at 10 % concentration.

Hastelloy C22 Ferrule Fittings has excellent resistance to phosphoric acid, which also gives rates for phosphoric acid containing 1 % of hydrofluoric acid. Hastelloy C22 Double Ferrule Fittings has good fabricability, where annealing for cold forming should be done at 1900 Degree F. Forming, machining, and welding are carried out by standard procedures for Hastelloy C22 Female Connector Fittings. The temperature range of Alloy C22 Compression Tube Fittings for heavy forming or forging is 1850 Degree F to 2200 Degree F, where light working can be done at temperatures down to 1700 Degree F.

Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes

Alloy C22 Ferrule Tube Fittings is readily cold formed by conventional procedures although its work – hardening rate is high. For best results, Alloy C22 Double Ferrule Tube Fittings should be cold formed in the fine – grain condition, and frequent intermediate anneals should be used. Alloy C22 Female Connector Fittings can also be cut using any conventional plasma arc cutting system.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C22 Tube to Female Pipes Specifications
Specifications : ASTM B366 ASME SB 366
Size : OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Pressure Rating
 : 3000 – C220 PSI
Applicable Temperature
 : 150-400 C
Type
 : Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

C22 Hastelloy Alloy Tube to Female Pipes Fitting Chemical Composition

Hastelloy C22 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.010 max 12.5 – 14.5 0.50 max 0.08 max 2 – 6 0.02 max 0.02 max 2.5 max 20 – 22.5

Hastelloy Alloy C22 Tube to Female Pipes Fitting Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.69 g/cm3 1399 °C (2550 °F) Psi – 45000 , MPa – 310 Psi – 1,00,000 , MPa – 690 45 %

Equivalent Grades for C22 Hastelloy Tube to Female Pipes Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Hastelloy C22 N06022 2.4602 – NiCr21Mo14W NW 6022 – –
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy Alloy C22 Tube to Female Pipes Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C22 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C22 Tube to Female Pipes
ss 304 tube fittings 1

Sachiya Steel International is one of pioneer Manufacture and Exporter for Hastelloy C22 Tube to Female Pipes, which has shown moderate to poor resistance to hydrochloric acid.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][/bt_section]
By |2021-07-12T11:11:14+05:30July 12th, 2021|

Stainless Steel 904L Tube to Female Pipes Manufacturers In India

Sachiya Steel International is one of the prominent whole Manufacture and Exporter for Stainless Steel 904L Tube to Female Pipes, which as well resists general corrosion by many aqueous media. Because of its lower carbon – content, our Stainless Steel 904L Tube Fittings minimizes carbide precipitation, and improves weldability. The protective oxide film of these Stainless Steel 904L Compression Fittings which is formed is adherent in both static and cyclic conditions of heating and cooling, and resistance to carburization is enhanced when a thin film of oxide is being formed on the alloy through pre – oxidation prior to service.

Chromium carbides precipitate in our Stainless Steel 904L Female Connector Fittings at temperatures between 1000 Degree F and 2000 Degree F (540 Degree C and 1095 Degree C). These Stainless Steel 904L Ferrule Tube Fittings has good rupture and creep strength and excellent resistance to oxidation, carburization and sulfidation at temperatures up to 816 Degree C.

Stainless Steel 904L Tube to Female Pipes

Consequently, our Stainless Steel 904L Double Ferrule Tube Fittings are similar to other austenitic alloys in that they can be rendered susceptible to inter – granular corrosion (sensitized) in certain aggressive environments by exposure to temperatures of 1000 Degree F to 1400 Degree F (540 Degree C – 760 Degree C). Resistance to hydrogen of these 904L Stainless Steel Female Connector Fittings is excellent and standard materials used in the production of hydrogen in steam / hydrocarbon reforming processes.

Stainless Steel 904L Tube to Female Pipes Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

904L Stainless Steel Tube to Female Pipes Fitting Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
904L min. – – – – – 19.0 4.00 23.00 0.10
max. 0.20 2.00 1.00 0.045 0.035 23.0 5.00 28.00 0.25

Stainless Steel 904L Tube to Female Pipes Fitting Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
904L 490 220 35 70-90 typical –

Stainless Steel 904L Tube to Female Pipes Fitting Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
904L 8000 200 15.0 – – 13.0 – 500 850

Equivalent Grades for 904L Stainless Steel Tube to Female Pipes Fitting

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
904L N08904 904S13 X1NiCrMoCu25-20-5 1.4539 – – SUS 890L

SS 904L Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 904L Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-09T12:00:57+05:30July 10th, 2021|Tube to Female Pipes|

Stainless Steel 446 Tube to Female Pipes Manufacturers In India

Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 446 Tube to Female Pipes, which is the strongest of the alloys, useful for continuous service to 1800 Degree F. Deposits of these Stainless Steel 446 Tube Fittings have outstanding resistance to wear, erosion, creep, thermal fatigue and oxidation. Because of its long and widespread use, Stainless Steel 446 Compression Fittings has been the subject of many investigations to determine its properties over a wide range of conditions, thus making it an unusually well characterized material.

Stainless Steel 446 Tube to Female Pipes

When exposed for prolonged periods at intermediate temperatures, these Stainless Steel 446 Female Connector Fittings exhibits a loss of room temperature ductility in much the same fashion as other super – alloys. Stainless Steel 446 Ferrule Tube Fittings is welded using gas tungsten arc, gas metal arc, shielded metal arc, electron beam and resistance welding, where submerged arc welding is not recommended.

These Stainless Steel 446 Double Ferrule Tube Fittings is used good for joint fit-up, minimum restraint, low inter – pass temperature and cool rapidly from welding. For maximum ductility, fabricated components of 446 Stainless Steel Female Connector Fittings should be annealed 2150 Degree F – 2250 Degree F, and then rapid cool. The principal application of these 446 Stainless Steel Ferrule Tube Fittings is for hard – facing turbine blade interlock surfaces, which are further available in straight cut lengths or layer wound spools.

Stainless Steel 446 Tube to Female Pipes Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

446 Stainless Steel Tube to Female Pipes Fitting Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
446 min. – – – – – 23.0 – – 0.10
max. 0.2 1.5 0.75 0.040 0.030 30.0 – 0.50 0.25

Stainless Steel 446 Tube to Female Pipes Fitting Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
446 485 275 20 92 201

Stainless Steel 446 Tube to Female Pipes Fitting Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
446 7750 200 9.9 11.4 11.6 24.9 28.7 460 570

Equivalent Grades for 446 Stainless Steel Tube to Female Pipes Fitting

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
446 S44600 – – 1.4762 / 1.4763 – – –

SS 446 Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 446 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-09T12:06:11+05:30July 10th, 2021|Tube to Female Pipes|

Stainless Steel 410 Tube to Female Pipe Manufacturers In India

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 410 Tube to Female Pipes, which is the higher carbon version of the alloy. These Stainless Steel 410 Tube Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C). In most instances, the carbon content of Stainless Steel 410 Compression Fittings enables dual certification. These Stainless Steel 410 Female Connector Fittings cannot be hardened by heat treatment, only by cold working.

Stainless Steel 410 Ferrule Fittings can be easily welded and processed by standard shop fabrication practices. These Stainless Steel 410 Double Ferrule Fittings can be used in nitric solutions and also in most diluted organic acids at moderate temperatures. SS 410 Tube Fittings used in pure phosphoric acid at lower temperatures and up to 10 % diluted solutions at elevated temperatures. These SS 410 Compression Fittings resists polyphonic acid stress corrosion cracking in hydrocarbon service.

SS 410 Female Connector Fittings can also be utilized in chloride or fluoride free caustic solutions at moderate temperatures. These SS 410 Ferrule Fittings does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. The high Sulphur content of SS 410 Double Ferrule Fittings also has a detrimental impact on hot workability. If hot forming is required, once again, these SS 410 Compression Tube Fittings should be considered as an alternate selection.

Stainless Steel 410 Tube to Female Pipes Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

410 Stainless Steel Tube to Female Pipes Fitting Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
410 min. – – – – – 11.5 – – –
max. 0.15 1.0 1.00 0.040 0.030 13.5 – 0.75 –

Stainless Steel 410 Tube to Female Pipes Fitting Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
410 480 275 16 95 201

Stainless Steel 410 Tube to Female Pipes Fitting Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
410 7750 200 9.9 11.4 11.6 24.9 28.7 460 570

Equivalent Grades for 410 Stainless Steel Tube to Female Pipes Fitting

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
410 S41000 410S21 56A 1.4006 X12Cr13 2302 SUS 410

SS 410 Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 410 Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-26T11:27:04+05:30July 9th, 2021|

Stainless Steel 347H Tube to Female Pipe Manufacturers In India

Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 347H Tube to Female Pipes, which are generally through hardened, not surface treated. Stainless Steel 347H Tube Fittings is reserved for those steels that contain a modest amount of alloying elements and that usually depend on thermal treatment to develop specific properties. Subdivisions for Stainless Steel 347H Compression Fittings include “through – harden able” and “carburizing” grades (plus several specialty grades such as nitriding steels).

Through – hardening Stainless Steel 347H Female Connector Fittings — which are heat treated by quenching and tempering — are used when maximum hardness and strength must extend deep within a part. Carburizing Stainless Steel 347H Ferrule Fittings are used where a tough core and relatively shallow, hard surface are needed. After a surface – hardening treatment such as carburizing (or nitriding for nitriding alloys), these Stainless Steel 347H Double Ferrule Fittings are suitable for parts that must withstand wear as well as high stresses.

With proper heat treatment, for example, tensile strength of Stainless Steel 347H Ferrule Fittings can be raised. Sachiya Steel International has provided 347H Stainless Steel Female Connector Fittings based on our technological forging and heat treatment know – how accumulated through many manufacturing performance. 347H Stainless Steel Tube Fittings has superior cold forming properties and exhibits short term tensile and creep strength at temperatures up to 550 degrees F.

Stainless Steel 347H Tube to Female Pipes Specifications
Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread : NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

347H Stainless Steel Tube to Female Pipes Fitting Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
347H min. 0.04 – – – – 17.0 3.00 9.0 –
max. 0.10 2.0 1.00 0.045 0.030 19.0 4.00 13.0 –

Stainless Steel 347H Tube to Female Pipes Fitting Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
347H 515 205 40 92 201

Stainless Steel 347H Tube to Female Pipes Fitting Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
347H 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 347H Stainless Steel Tube to Female Pipes Fitting

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
347H S34709 – – 1.4961 – – –

SS 347H Tube to Female Pipes Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 347H Tube to Female Pipes Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-26T16:54:28+05:30July 9th, 2021|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top