Brass Wire Mesh Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Brass Wire Mesh, where the lower ductility restricts some very severe operations. Brass Hexagonal Wire Mesh has a higher yield strength, higher tensile strength and lower work hardening rate compared to 316. Brass Welding Wire Mesh has quite good deep drawing capability; close to that of 316, but it has limited ability to stretch form. If very severe cold working is required in Brass Netting Wire Mesh, it may be necessary to carry out an intermediate anneal. Brass Woven Wire Mesh is an austenitic stainless steel grade with a useful combination of corrosion resistance and high strength.

Because it has almost no molybdenum and low nickel content, Brass Spring Steel Wire Mesh is an economical alternative to 304 or 316 in some applications. Brass Fencing Wire Mesh cannot be hardened by thermal treatment, but does work harden. We are proactive organization Specialist in Brass Hex Wire Mesh and other quality products that meet and exceed customer’s specific requirements and thus ensure complete satisfaction.

Brass Wire Mesh

Brass Wire Mesh

Brass Wire Mesh is easier to machine than the standard austenitic grades such as 316, but the grade is not commonly available as a bar. Our spherical Brass Welding Wire Mesh has a high level of sphericity, low oxygen content, high density (bulk and tapped) and as well as controlled grain size.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Wire mesh Specifications
Specifications : ASTM B62 / ASME SB62
Standard : ASTM, ASME and API
Length : 100 mm To 3000 mm Long & Above
Types : Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Wire Mesh Chemical Composition
Brass Cu Fe Pb Zn
Min./Max. 60.0-63.0 0.35 2.5-3.0 Rem.
Nominal 61.5 2.7 35.4
Brass Wire Mesh Physical Properties
Properties US Customary
Melting Point -Liquidus 1650 F
Melting Point -Solidus 1630 F
Density 0.307 lb/in3at 68 F
Electrical Resistivity 39.90 ohms – cmil/ft @ 68 F
Electrical Conductivity 26 %IACS @ 68 F
Thermal Conductivity 67 Btu · ft/(hr · ft2·oF)at 68F
Modulas of Elasticity in Tension 14000 ksi
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Wire Mesh Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Brass Wire mesh Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Brass Wire Mesh
Brass Wire Mesh Manufacturer 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Brass Wire Mesh, where the lower ductility restricts some very severe operations. Brass Hexagonal Wire Mesh has a higher yield strength, higher tensile strength and lower work hardening rate compared to 316

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]