Sachiya Steel International

astm b366

Monel 400 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the leading manufacturer and Exporter of Monel 400 Buttweld Fittings, which are made to perfection using high quality steel by our sedulous professionals who possess rich knowledge in this domain. In fact, Monel 400 Tee Pipe Fittings is a nickel – copper alloy that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel 400 Pipe Elbow works in a wide range of temperatures, and is available in multiple forms for a variety of products.

Meanwhile, these Monel 400 Reducer are also being offered in different sizes and shapes to our customers. Our Monel 400 Cross Pipe Fittings (UNS N04400) is a nickel – copper alloy with good strength and excellent corrosion resistance in a range of media especially sea water, hydrofluoric acid, sulfuric acid, and alkalis.

Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings | Monel 400 Buttweld Fittings

Monel 400 Bend Pipe Fittings is a solid – solution alloy that can be hardened only by cold working, where nickel and copper form a solid solution in all compositions. These Monel 400 Stub End can be fabricated readily by hot – and cold – working, machining, and welding. Thus, Monel 400 End Cap Pipe Fittings can only be hardened by further rolling, while showing excellent corrosion resistance, which is higher than that of pure nickel in reduced environments and better than that of copper in oxidizing environments.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Monel 400 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Monel 400 Pipe Fittings Chemical Composition

Monel 400 Ni C Al Mn Si Fe Cu S Co Cr
63.0 min 0.3 max 0.50 max 2.0 max 0.5 max 1.0 – 2.5 28.0 – 34.0 0.02 max – –

Monel 400 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.8 g/cm3 1350 °C (2460 °F) Psi – 35,000 , MPa – 240 Psi – 80,000 , MPa – 550 40 %

Equivalent Grades for 400 Monel Pipe Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Monel 400 N04400 2.4360 NU-30M NiCu30Fe NW 4400 NA 13 МНЖМц 28-2,5-1,5
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Monel Alloy 400 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Monel 400 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Monel 400 Buttweld Fittings
alloy steel buttweld fitting 500x500 500x500 1

Sachiya Steel International is one of the leading manufacturer and Exporter of Monel 400 Buttweld Fittings, which are made to perfection using high quality steel by our sedulous professionals who possess rich knowledge in this domain.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-08-13T10:39:00+05:30August 13th, 2021|

Hastelloy X Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy X Buttweld Fittings in a wide range, which is engineered with precision by our skilled professionals who make sure to use premium stainless steel in the manufacturing process. Hastelloy X Reducer Pipe Fittings (UNS N06002) is a nickel – chromium – iron – molybdenum super – alloy with outstanding high temperature strength, oxidation resistance, and fabricability. Hastelloy X Bend Pipe Fittings has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications.

Hastelloy X Elbow Pipe Fittings is recommended especially for use in furnace applications because it has unusual resistance to oxidizing, reducing, and neutral atmospheres. Hastelloy X Tee Pipe Fittings exhibits good formability, weldability, and machinability. Meanwhile, these Hastelloy X Cross Pipe Fittings are also being offered in customized sizes and shapes to our customers. Pre – heating of Hastelloy X Stub End is not required, except for very heavy section thickness welds or heavily constrained welds. Post – heating of Hastelloy X End Cap Pipe Fittings is not required but a stress relief anneal, after welding of thick sections or greater, is desirable.

Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings | Hastelloy X Buttweld Fittings

However, Hastelloy X Dish Cap Pipe Fittings may be used in the as welded condition, which further can be welded together to achieve longer lengths. The superior combination of ductility and fracture toughness makes Hastelloy X End Pipe Cap a great choice for high operating pressures or more depending on wall thickness.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy X Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy X Pipe Fittings Chemical Composition

Hastelloy X Ni C Mo Mn Si Fe Cu Ti Co Cr
Balance 0.05-0.15 8.0-10.0 1.0 max 1.0 max 17.0-20.0 0.50 max 0.15 max 0.5-2.5 20.5-23.0

Equivalent Grades for X Hastelloy Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy X N06002 2.4665
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy Alloy X Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy X Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy X Buttweld Fittings
1 6dbTbi3qonztGNGrTwr4rw

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy X Buttweld Fittings in a wide range, which is engineered with precision by our skilled professionals who make sure to use premium stainless steel in the manufacturing process.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-08-12T10:54:20+05:30August 12th, 2021|

Hastelloy B3 Buttweld Fittings Manufacturer In India

Hastelloy B3 Buttweld Fittings Manufacturer In India

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B3 Buttweld Fittings. Meanwhile, these Hastelloy B3 Cross Pipe Fittings (UNS N10675) is an additional member of the nickel – molybdenum family of alloys with excellent resistance to hydrochloric acid at all concentrations and temperatures. Our Hastelloy B3 Bend Pipe Fittings is a Nickel – Molybdenum alloy which gives excellent resistance to hydrochloric acid at all concentrations and temperatures from ambient to high.

These Hastelloy B3 Elbow is used in aircraft, furnace and chemical process components, honeycombs and gas turbine combustion section components. Our Hastelloy B3 Tee Pipe Fittings exhibits extremely high resistance to pure hydrochloric, hydrobromic, and sulfuric acids. Meanwhile, these Hastelloy B3 Reducer are also being offered in customized sizes and shapes to our customers. Our Hastelloy B3 Stub End Pipe Fittings, with a minimum nickel content of 72 %, is virtually immune to chloride – ion stress corrosion cracking.

These Hastelloy B3 End Cap Pipe Fittings is subject to stress – corrosion cracking in high-temperature, high-strength caustic alkalis. Our Hastelloy B3 End Pipe Cap for such service should be fully stress-relieved at 1650 Degree F / 1 hour or 1450 Degree F / 4 hour (900 Degree C / 1 hour or 790 Degree C / 4 hour) prior to use, and operating stresses should be kept to a minimum.

Hastelloy B3 Buttweld Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Hastelloy B3 Pipe Fittings Chemical Composition

Hastelloy B3 Ni C Mo Mn Si Fe Cu Ti Co Cr
65.0 min 0.01 max 28.5 3.0 max 0.10 max 1.5 0.20 max 0.2 max 3.0 max 1.5

Equivalent Grades for B3 Hastelloy Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy B3 N010675 2.4600

Hastelloy Alloy B3 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B3 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-10-14T17:38:12+05:30August 12th, 2021|

Hastelloy C276 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy C276 Buttweld Fittings to the esteemed clients. Hastelloy C276 Elbow Butt Weld Pipe Fittings (UNS N10276) is a nickel – molybdenum – chromium super – alloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. Sachiya Steel International is one of the well – known trader and dealer of Hastelloy C276 Tee Butt Weld Pipe Fittings, which is used in chemical process equipment and desulfurization of flue gas equipment. Hastelloy C276 Cross Butt Weld Pipe Fittings has excellent corrosion resistance in a wide range of corrosive media including, Sulphur compounds and chloride ions.

Hastelloy C276 Pipe Reducer is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process applications in an as welded condition. Meanwhile, these Hastelloy C276 Pipe Bend are also being offered in customized sizes and shapes to our customers.

Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings | Hastelloy C276 Buttweld Fittings

The addition of a small percentage of the alloying elements under consideration makes Hastelloy C276 Stub End Butt Weld Pipe Fittings possible to retard the transformation more effectively and hence to produce better physical properties. By increasing the content of nickel, the transformation range of Hastelloy C276 End Pipe Cap is finally lowered to a point below normal atmospheric temperature.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C276 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy C276 Pipe Fittings Chemical Composition

Hastelloy C276 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.01 max 15 – 17 1.0 max 0.08 max 4 – 7 0.04 max 0.03 max 2.5 max 14.5 – 16.5

Hastelloy C276 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.89 g/cm3 1370 °C (2500 °F) Psi – 52,000 , MPa – 355 Psi – 1,15,000 , MPa – 790 40 %

Equivalent Grades for C276 Hastelloy Pipe Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS OR GOST
Hastelloy C276 N10276 2.4819 – NiMo16Cr15W NW 0276 ЭП760 ХН65МВУ
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy Alloy C276 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C276 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C276 Buttweld Fittings
hastelloy c276 buttweld pipe fittngs 500x500 1

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy C276 Buttweld Fittings to the esteemed clients.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-08-11T10:30:54+05:30August 11th, 2021|

Hastelloy B2 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B2 Buttweld Fittings, which is available in different sizes and shapes. Meanwhile, Hastelloy B2 Elbow Butt Weld Pipe Fittings (UNS N10665) has great resistance to stress – corrosion cracking and pitting. These Hastelloy B2 Tee Butt Weld Pipe Fittings has significantly lower carbon, silicon and iron compared to its’ predecessor, Alloy B (UNS N10001), making the alloy less susceptible to decreased corrosion resistance in the weld zone, in the as – welded condition. Our Hastelloy B2 Pipe Reducer has excellent resistance to all temperatures and concentrations of hydrochloric acid.

These Hastelloy B2 Cross Butt Weld Pipe Fittings has resistant to stress corrosion cracking and pitting. Our Hastelloy B2 Bend is used for most chemical process applications in the welded condition. Meanwhile, these Hastelloy B2 Stub End Butt Weld Pipe Fittings are also being offered in customized sizes and shapes to our customers. Our Hastelloy B2 Dish Cap Butt Weld Pipe Fittings provides supreme resistance to stress corrosion cracking to the boiling magnesium chloride test.

Hastelloy B2 Buttweld Fittings| Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings | Hastelloy B2 Buttweld Fittings

These Hastelloy B2 End Cap Butt Weld Pipe Fittings is a completely austenitic corrosion resistant alloy that offers excellent resistance to aqueous and high temperature corrosion. Chromium content in our Hastelloy B2 Concentric Reducer Pipe Fittings prevents attack in the oxidizing conditions and molybdenum and tungsten resist wet reducing attack.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B2 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy B2 Pipe Fittings Chemical Composition

Hastelloy B2 Ni C Mo Mn Si Fe P S Co Cr
Balance 0.02 max 26.0-30.0 1.0 max 0.10 max 2.0 max 0.040 max 0.030 max 1.0 max 1.0 max

Hastelloy B2 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
9.2 g/cm3 1370 °C (2500 °F) Psi – 51,000, MPa – 350 Psi -1,10,000, MPa -760 40 %

Equivalent Grades for B2 Hastelloy Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy B2 N10665 2.4617
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy Alloy B2 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy B2 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B2 Buttweld Fittings
hastelloy b2 b3 buttweld fittings 500x500 1

Sachiya Steel International is one of the leading manufacturer and exporter of Hastelloy B2 Buttweld Fittings, which is available in different sizes and shapes.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-08-11T10:17:37+05:30August 11th, 2021|

Hastelloy C22 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is leading manufacturer and exporter of Hastelloy C22 Buttweld Fittings to the esteemed clients, which has some excellent features to offer such as precise dimensions, excellent finishing, optimum material strength and more. Hastelloy C22 Elbow Pipe Fittings (UNS N06022) is extremely resistant to corrosion in oxidizing and reducing environments. The high chromium content in Hastelloy C22 Tee Pipe Fittings provides good resistance to oxidizing media. The molybdenum and tungsten content in Hastelloy C22 Cross Pipe Fittings gives good resistance to reducing media.

Hastelloy C22 Reducer also withstands sulphuric, acetic, formic and phosphoric acids and other non – oxidizing media. Meanwhile, these Hastelloy C22 Bend Pipe Fittings are also being offered in customized sizes and shapes to our customers, where we also offer the same at market leading rates. Hastelloy C22 Stub End should not be used in service temperatures above 1250 Degree F due to the formation of detrimental phases which form above this temperature. Hastelloy C22 End Cap Pipe Fittings is a versatile austenitic nickel – chromium – molybdenum – tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking.

Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings | Hastelloy C22 Buttweld Fittings

Although ductile enough to be formed by cold working, intermediate annealing of Hastelloy C22 End Pipe Cap may be necessary due to work hardening. Forging in Hastelloy C22 Lateral Tee Pipe Fittings should be performed between the ranges of 1750 Degree F – 2050 Degree F, followed by rapid cooling.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C22 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy C22 Pipe Fittings Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20.00 – 22.50 2.00 – 6.00 12.50 – 14.50 0.02 max

Hastelloy C22 Buttweld Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy C22 8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Equivalent Grades for C22 Hastelloy Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N06022 NW 6022 – NiCr21Mo14W –
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Hastelloy Alloy C22 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Hastelloy C22 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy C22 Buttweld Fittings
stainless steel buttweld fittigs 1

Sachiya Steel International is leading manufacturer and exporter of Hastelloy C22 Buttweld Fittings to the esteemed clients, which has some excellent features to offer such as precise dimensions, excellent finishing, optimum material strength and more.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-08-10T11:32:01+05:30August 10th, 2021|

Incoloy 330 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is a leading manufacturer and exporter of Incoloy 330 Buttweld Fittings to the clients, which is highly resistant to corrosion and is made by using quality material. Our Inconel 330 Pipe Fittings (UNS N08330) has good strength at high temperatures and excellent resistance to carburizing and oxidizing atmospheres. These SS 330 Elbow Pipe Fittings has a solid solution composition and is not harden able by heat treatment. The high nickel and chromium of Ra 330 Tee Pipe Fittings provide good resistance to oxidation and carburization.

These Inconel 330 Reducer Pipe Fittings combines excellent resistance to carburization and oxidation at temperatures up to 2200 Degree F (1200 Degree C) with high strength. Meanwhile, SS 330 Bend Pipe Fittings are also being offered in different sizes and shapes to our customers. These Ra 330 Stub End may be forged between 2100 Degree F / 1750 Degree F (1150 Degree C / 950 Degree C), which further come in various thickness and dimension to suit the requirement of our clients.

Incoloy 330 Buttweld Fittings | Incoloy 330 Buttweld Fittings | Incoloy 330 Buttweld Fittings |  Incoloy 330 Buttweld Fittings | Incoloy 330 Buttweld Fittings | Incoloy 330 Buttweld Fittings | Incoloy 330 Buttweld Fittings | Incoloy 330 Buttweld Fittings | Incoloy 330 Buttweld Fittings | Incoloy 330 Buttweld Fittings | Incoloy 330 Buttweld Fittings

The strength and oxidation resistance of Incoloy 330 End Pipe Cap> at elevated temperatures make it a useful material for industrial heating furnaces; for conveyor systems, muffles, retorts, baskets, boxes, and various fixtures. These SS 330 Dish Cap Pipe Fittings is often used in Chemical process, Food processing, Petrochemical, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 330/ SS 330/ Ra 330 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 330/ SS 330/ Ra 330 Pipe Fittings Chemical Composition

Grade C Mn Si P S Cr Cu N
330 min. – – 0.75 – – 17.0 – 34.0
max. 0.08 2.0 1.50 0.030 – 20.0 – 37.0

Incoloy 330/ SS 330/ Ra 330 Buttweld Fittings Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
330 – – – – –

Equivalent Grades for Incoloy 330/ SS 330/ Ra 330 Pipe Fitting

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Incoloy 330 N08330 – – 1.4886 – – –
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy Alloy 330 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 330 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 330 Buttweld Fittings
stainless steel 347 347h buttweld fittings 500x500 1

Sachiya Steel International is a leading manufacturer and exporter of Incoloy 330 Buttweld Fittings to the clients, which is highly resistant to corrosion and is made by using quality material.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-08-06T10:45:22+05:30August 6th, 2021|

Incoloy 925 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

Sachiya Steel International is one of the leading manufacturer and exporter of Incoloy 925 Buttweld Fittings, which are made under the team of skilled professionals. Composition of Incoloy 925 Elbow Pipe Fittings (UNS N09925) offers a high level of strength and corrosion resistance. Incoloy 925 Long Radius Elbow Pipe Fittings combines the high strength of a precipitation – harden able alloy with the excellent corrosion resistance of alloy 825. These Incoloy 925 Concentric Reducer has outstanding resistance to general corrosion, pitting, crevice corrosion, and stress – corrosion cracking in many aqueous environments including those containing sulfides and chlorides.

Machinable and weldable, Incoloy 925 Equal Tee can be hot and cold worked. On the other hand, copper and molybdenum in Incoloy 925 Cross Pipe Fittings are added to increase its resistance to corrosive media. Meanwhile, these Incoloy 925 Bends Pipe Fittings are also being offered in different sizes and shapes to our customers. With the additions of molybdenum, copper, titanium and aluminum, Incoloy 925 Short Stub Bend Pipe Fittings is an age harden able nickel – iron – chromium alloy, providing a combination of high strength and excellent corrosion resistance.

Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings | Incoloy 925 Buttweld Fittings

During heat treatment in Incoloy 925 End Pipe Cap, a strengthening reaction is caused by the addition of titanium and aluminum. These Incoloy 925 Short Radius Elbow Fittings has excellent resistance to pitting and crevice corrosion, which can be age – hardened by adding aluminum and titanium.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 925 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 925 Pipe Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
925 0.03 max 1.00 max 0.05 max 0.03 max 1.50 – 3.00 22.00 min 42.00 – 46.00 19.55 – 22.50 0.01-0.05 max –

Incoloy 925 Buttweld Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 925 Incoloy Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS
Incoloy 925 – N09925 NCF 925
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy Alloy 925 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 925 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 925 Buttweld Fittings
inconel 925 buttweld fittings 500x500 2

Sachiya Steel International is one of the leading manufacturer and exporter of Incoloy 925 Buttweld Fittings, which are made under the team of skilled professionals.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][/bt_section]
By |2021-08-05T13:03:21+05:30August 5th, 2021|

Incoloy 825 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the leading manufacturer and exporter of Incoloy 825 Buttweld Fittings, which is highly demanded for its durability and sturdiness. Incoloy 825 Elbow Pipe Fittings (UNS N08825) has good resistance in neutral chloride media, stress – corrosion cracking and satisfactory resistance to pitting and crevice corrosion. Incoloy 825 Long Radius Elbow Pipe Fittings does work-harden during machining and has higher strength and “gumminess” not typical of steels.

Incoloy 825 Short Radius Elbow Pipe Fittings has good mechanical properties from moderately to high temperatures. Incoloy 825 Concentric Reducer Pipe Fittings has high nickel content, sufficient to resist chloride ion stress corrosion cracking, and a very stable austenite structure. Meanwhile, these Incoloy 825 Eccentric Reducer are also being offered in different sizes and shapes to our customers. Incoloy 825 Equal Tee Pipe Fittings, in conjunction with the molybdenum and copper, gives superb resistance to reducing environments such as those containing sulfuric and phosphoric acids.

Incoloy 825 Buttweld Fittings | Incoloy 825 Buttweld Fittings | Incoloy 825 Buttweld Fittings | Incoloy 825 Buttweld Fittings | Incoloy 825 Buttweld Fittings | Incoloy 825 Buttweld Fittings | Incoloy 825 Buttweld Fittings | Incoloy 825 Buttweld Fittings | Incoloy 825 Buttweld Fittings | Incoloy 825 Buttweld Fittings | Incoloy 825 Buttweld Fittings

Typical applications of Incoloy 825 Unequal Tee Pipe Fittings are: phosphoric acid evaporators; pickling – tank heater, pickling equipment and hooks; etc. Incoloy 825 Lateral Tee Pipe Fittings is also used for chemical processing, pollution – control equipment, nuclear fuel reprocessing, oil and gas well piping, acid production, and more. Incoloy 825 Short Stub Bend Pipe Fittings exhibits outstanding performance in both acids and alkalis in oxidizing as well as reducing environments. We also offer these Incoloy 825 Long Stub Bend in best possible rates.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 825 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy 825 Pipe Fittings Chemical Composition

Grade C Mn Si S Cu Fe Ni Cr Al Ti
825 0.05 max 1.00 max 0.05 max 0.03 max 1.50 – 3.00 22.00 min 38.00 – 46.00 19.50 – 23.50 0.02 max 0.06 – 1.20

Incoloy 825 Buttweld Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
825 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 825 Incoloy Pipe Fitting

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN OR
Incoloy 825 2.4858 N08825 NCF 825 NA 16 ЭП703 NFE30C20DUM NiCr21Mo XH38BT
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Incoloy Alloy 825 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Incoloy 825 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Incoloy 825 Buttweld Fittings
unnamed 5 1

Sachiya Steel International is one of the leading manufacturer and exporter of Incoloy 825 Buttweld Fittings, which is highly demanded for its durability and sturdiness.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-08-05T12:00:05+05:30August 5th, 2021|

Inconel 718 Buttweld Fittings Manufacturers In India

Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 718 Buttweld Fittings to the clients. Inconel 718 Pipe Fittings (UNS N07718) is a Nickel – Chromium alloy being precipitation harden able and having high creep – rupture strength at high temperatures to about 700 Degree C (1290 Degree F). Inconel 718 Cross Pipe Fittings is a nickel – based super alloy that is well suited for applications requiring high strength in temperature ranges from cryogenic up to 1400 Degree F. Inconel 718 Elbow Pipe Fittings has excellent weldability when compared to the nickel-base super – alloys hardened by aluminum and titanium.

Inconel 718 Tee Pipe Fittings combines corrosion resistance and high strength with outstanding weldability, including resistance to post – weld cracking. Meanwhile, these Inconel 718 Reducer Pipe Fittings are also being offered in different sizes and shapes to our customers. Inconel 718 Stub End Pipe Fittings can be readily worked and age hardened, where further improvements are coming with the rising interest of aerospace industry towards additive layer manufacturing (ALM) of ever more critical components.

Inconel 718 Buttweld Fittings

Inconel 718 Bends Pipe Fittings has excellent weldability when compared to the nickel – base super – alloys hardened by aluminum and titanium. The age – harden able Inconel 718 End Pipe Cap can be readily fabricated, even into complex parts. When you call, you’ll talk to experienced people in making Inconel 718 Dish Cap Pipe Fittings who know their business, and yours.

Inconel 718 Pipe Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Inconel 718 Pipe Fittings Chemical Composition

Grade C Mn Si Fe S Cr Al Ni
718 min. – – – bal – 17.0 0.2 50.0
max. 0.08 0.35 0.35 bal 0.01 21.0 0.8 55.0

Inconel 718 Buttweld Fittings Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
718 8.14 g/cm3 1400 °C (2550 °F) Psi – 80,000 , MPa – 550 Psi – 32,000 , MPa – 220 30 %

Equivalent Grades for 718 Inconel Pipe Fitting

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
Inconel 718 N07718 – – 2.4668 – – –

Inconel Alloy 718 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Inconel 718 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-06T17:35:21+05:30August 4th, 2021|Buttweld Fittings|

SACHIYA STEEL INTERNATIONAL

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top