Hastelloy B2 Tube to Male Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Tube to Male Fittings, where all our offered products are ensured for their seamless finish and design. These Hastelloy B2 Tube Fittings must not be used in oxidizing media or where oxidizing pollutants are accessible in reducing media. In excess of most other metals of parallel chemistry, our Hastelloy B2 Compression Fittings offers higher protection in opposition to commanding chemical corrosion and comes by means of one of the finest high – temperature potencies of any steel.

Hastelloy B2 Tube to Male Fittings

Hastelloy B2 Tube to Male Fittings

These Hastelloy B2 Male Connector Fittings can be machined by using all the customary machining procedures. Our Hastelloy B2 Ferrule Fittings (UNS N10665) must not be used at temperatures in the range of 1000 Degree F and 1600 Degree F as the alloy forms secondary stages that may perhaps lessen the ductility of the product. Meanwhile, these Hastelloy B2 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers.

Our Alloy B2 Male Connector Tube Fittings is seldom attacked to this degree in other media, where in fact only one – third of the coupon thickness in the heat – affected zone survived the corrosion test. Experiments in these Alloy B2 Tube Fittings were performed in increments of solution temperature of 5 degree C for a 24 – hour exposure period to determine the critical pitting temperature, i.e. the lowest temperature at which pitting corrosion initiated.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B2 Tube to Male Fittings Specifications
Specifications : ASTM B366 ASME SB366
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Hastelloy, 300/1000/3000PSI for Brass
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy Alloy B2 Tube To Male Fittings Chemical Composition
Grade C Mn Si S Co Ni Cr Fe Mo P
B2 0.010 max 1.00 max 0.08 max 0.03 max 2.50 max 50.99 min* 14.50 – 16.50 4.00 – 7.00 15.00 – 17.00 0.04 max
Hastelloy B2 Tube To Male Fittings Mechanical Properties
Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Hastelloy B2 8.89 g/cm3 1370 °C (2500 °F) Psi – 1,15,000 , MPa – 790 Psi – 52,000 , MPa – 355 40 %
Equivalent Grades for B2 Hastelloy Ferrule Fitting Tube To Male Fittings
STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy B2 2.4617 N10665 NW 0276 ХН65МВУ NiMo16Cr15W ЭП760
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Alloy B2 Tube To Male Fittings Application Industries
  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
Hastelloy B2 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Hastelloy B2 Tube to Male Fittings
Hastelloy B2 Tube to Male Fittings Manufacturer 2

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Hastelloy B2 Tube to Male Fittings, where all our offered products are ensured for their seamless finish and design. These Hastelloy B2 Tube Fittings must not be used in oxidizing media or where oxidizing pollutants are accessible in reducing media.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]