317 stainless steel magnetic Archives - Steel Pipes/Tubes Manufacturers, Top Pipe Suppliers


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Screw, which can be successfully welded by all standard methods, where preheating is not necessary. Properties of Stainless Steel 317 Hex Head Screws comparable to those of the parent metal may be achieved in the weld metal by post – weld heat treatment. As for other high strength steels, precaution should be taken in design and welding procedures of these Stainless Steel 317 Socket Head Cap Screws to avoid concentration of weldment stresses.

Stainless Steel 317 Screw Manufacturer In India | Stainless Steel 317 Screw Manufacturer In Mumbai | Stainless Steel 317 Screw Exporter In India | Stainless Steel 317 Screw Exporter In Mumbai | Stainless Steel 317 Screw Supplier In India | Stainless Steel 317 Screw Supplier In Mumbai | Stainless Steel 317 Screw Stockist In India | Stainless Steel 317 Screw Stockist In Mumbai
Stainless Steel 317 Screw
  Stainless Steel 317 Screw

After solution treatment a single low temperature “age hardening” treatment is employed to achieve required properties of Stainless Steel 317 Socket Set Screws. Heat treatment in these Stainless Steel 317 Anchors Screws results in no distortion and only superficial discoloration, where a slight decrease in size (shrinkage) takes place during the hardening. In solution treated, Stainless Steel 317 Blind Rivet has lower resistance to stress corrosion cracking, and lower ductility compared to aged conditions.

These Stainless Steel 317 Concrete Screws should not generally be used in the solution treated condition, even if the hardness is considered satisfactory. Stainless Steel 317 Threaded Screws has good oxidation resistance, but to avoid reduction of its mechanical properties and hardness it should not be used above its age hardening temperature. The great benefit of these Stainless Steel 317 Steel Shoulder Screws is that they are generally supplied in the solution treated condition.

SS 317 Screws Specifications
Specifications : ASTM A 193 ASME SA 193
Standard : IS, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M33
Type : Hex Head Screw, Socket Head Cap Screw, Socket Set Screws, Anchor Screw, Blind Rivet, Concrete screw, Threaded Screw, Steel Shoulder Screw, Panel Screw, Machine Screw.
317 Stainless Steel Screw Chemical Composition
Grade C Mn Si P S Cr Mo Ni N
317 min. 18.0 11.0
max. 0.8 2.0 1.00 0.040 0.03 20.0 14.0
Stainless Steel 317 Screw Mechanical Properties
Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
317 515 205 35 95 217
Stainless Steel 317 Screw Physical Properties
Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
317 8000 193 17.2 17.8 18.4 16.2 21.5 500 720
Equivalent Grades for 317 Stainless Steel Screw
Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
317 S31700 1.4449
SS 317 Screws Application Industries

Off-Shore Oil Drilling Companies
Power Generation
Petrochemicals
Gas Processing
Specialty Chemicals
Pharmaceuticals
Pharmaceutical Equipment
Chemical Equipment
Sea Water Equipment
Heat Exchangers
Condensers
Pulp and Paper Industry

317 Steel Screws Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)



 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Nuts And Bolts, which contain sufficient chromium to undergo passivation, forming an inert film of chromium oxide on the surface. Since iron oxide has lower density than Stainless Steel 317 Hex Head Bolts, the film expands and tends to flake and fall away. This layer prevents further corrosion by blocking oxygen diffusion to the surface of Stainless Steel 317 Hex Head Nuts and stops corrosion from spreading into the bulk of the metal.

Stainless Steel 317 Nuts Manufacturer In India | Stainless Steel 317 Nuts Manufacturer In Mumbai | Stainless Steel 317 Nuts Exporter In India | Stainless Steel 317 Nuts Exporter In Mumbai | Stainless Steel 317 Nuts Supplier In India | Stainless Steel 317 Nuts Supplier In Mumbai | Stainless Steel 317 Nuts Stockist In India | Stainless Steel 317 Nuts Stockist In Mumbai 
Stainless Steel 317 Nuts
        Stainless Steel 317 Nuts

Passivation in Stainless Steel 317 Square Bolts occurs only if the proportion of chromium is high enough and oxygen is present in it. Resistance to corrosion and staining, low maintenance, and familiar lustre make Stainless Steel 317 Square Nuts an ideal material for many applications. Stainless Steel 317 Eye Bolts is used in cookware, cutlery, household hardware, surgical instruments, major appliances, industrial equipment (for example, in sugar refineries).

Storage tanks and tankers used to transport orange juice and other food are often made of Stainless Steel 317 Eye Nuts, because of its corrosion resistance. High oxidation resistance of Stainless Steel 317 U-Bolts in air at ambient temperature is normally achieved with addition of a minimum of 13 % (by weight) chromium, and up to 26 % is used for harsh environments. Stainless Steel 317 Wing Nuts is also used as an automotive and aerospace structural alloy and construction material in large buildings.

SS 317 Bolt/Nut Specifications

Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

317 Stainless Steel Bolt/Nut Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
317 min. 18.0 11.0
max. 0.8 2.0 1.00 0.040 0.03 20.0 14.0

Stainless Steel 317 Bolt/Nut Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
317 515 205 35 95 217

Stainless Steel 317 Bolt/Nut Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
317 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 317 Stainless Steel Bolt/Nut

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
317 S31700 1.4449

SS 317 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

317 Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 317 Nuts
Stainless Steel 317 Nuts Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Nuts And Bolts, which contain sufficient chromium to undergo passivation, forming an inert film of chromium oxide on the surface. Since iron oxide has lower density than Stainless Steel 317 Hex Head Bolts, the film expands and tends to flake and fall away.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5


 

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Bolt And Nuts, which contain sufficient chromium to undergo passivation, forming an inert film of chromium oxide on the surface. Since iron oxide has lower density than Stainless Steel 317 Hex Head Bolts, the film expands and tends to flake and fall away. This layer prevents further corrosion by blocking oxygen diffusion to the surface of Stainless Steel 317 Hex Head Nuts and stops corrosion from spreading into the bulk of the metal. Passivation in Stainless Steel 317 Square Bolts occurs only if the proportion of chromium is high enough and oxygen is present in it.

Stainless Steel 317 Bolt Manufacturer In India | Stainless Steel 317 Bolt Manufacturer In Mumbai |Stainless Steel 317 Bolt Exporter In India | Stainless Steel 317 Bolt Exporter In Mumbai | Stainless Steel 317 Bolt Supplier In India | Stainless Steel 317 Bolt Supplier In Mumbai | Stainless Steel 317 Bolt Stockist In India |Stainless Steel 317 Bolt Stockist In Mumbai

Resistance to corrosion and staining, low maintenance, and familiar lustre make Stainless Steel 317 Square Nuts an ideal material for many applications. Stainless Steel 317 Eye Bolts is used in cookware, cutlery, household hardware, surgical instruments, major appliances, industrial equipment (for example, in sugar refineries). Storage tanks and tankers used to transport orange juice and other food are often made of Stainless Steel 317 Eye Nuts, because of its corrosion resistance.

Stainless Steel 317 Bolt
Stainless Steel 317 Bolt

High oxidation resistance of Stainless Steel 317 U-Bolts in air at ambient temperature is normally achieved with addition of a minimum of 13 % (by weight) chromium, and up to 26 % is used for harsh environments. Stainless Steel 317 Wing Nuts is also used as an automotive and aerospace structural alloy and construction material in large buildings.

SS 317 Bolt/Nut Specifications

Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts

317 Stainless Steel Bolt/Nut Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
317 min. 18.0 11.0
max. 0.8 2.0 1.00 0.040 0.03 20.0 14.0

Stainless Steel 317 Bolt/Nut Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
317 515 205 35 95 217

Stainless Steel 317 Bolt/Nut Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
317 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 317 Stainless Steel Bolt/Nut

Grade UNS No Old British Euronorm Swedish SS Japanese JIS
BS En No Name
317 S31700 1.4449

SS 317 Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

317 Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

Stainless Steel 317 Bolt
Stainless Steel 317 Bolt Manufacturer

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 317 Bolt And Nuts, which contain sufficient chromium to undergo passivation, forming an inert film of chromium oxide on the surface. Since iron oxide has lower density than Stainless Steel 317 Hex Head Bolts, the film expands and tends to flake and fall away.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5

Mumbai

Headquarters


D-2, Office no. 3, Gr. Floor, Bharat Nagar Society, Grant Road (E), Mumbai – 400007.
+91 9769056007

+91 22 66518863

[email protected][email protected]
LOCATIONS

We Are Everywhere


Stainless Steel 317 Bolt Manufacturer

OUR NETWORK india

MumbaiDelhiChennai


About Us

Sachiya Steel International

We are an ISO 9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.

We are an ISO TUV  9001:2015 Certified Company in India. We Sachiya Steel International Manufacturers Supplier and Exporter of Pipes and Tubes Products in India. We Provide all Types of Materials, Grades, Shapes, and Sizes as per the client’s requirements.