Stainless Steel 317 Tube to Male Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of High Quality Stainless Steel 317 Tube to Male Fittings, which is like SS 304 yet with a titanium expansion of no less than five times the carbon content. The real distinction in Stainless Steel 317 Tube Fittings is that the titanium expansion decreases carbide precipitation during welding. Stainless Steel 317 Compression Tube Fittings is a typical austenitic 18 / 8 stainless steel alloy, with the expansion of titanium. Stainless Steel 317 Male Connector Fittings is a low carbon austenitic nickel – chromium stainless steel with increments of molybdenum and copper.

Stainless Steel 317 Tube to Male Fittings

The structures of 317 Stainless Steel Compression Tube Fittings are principally utilized where the erosion safe properties are lacking, particularly in serious destructive conditions. In addition, 317 Stainless Steel Male Connector Fittings tube are widely used for general piping requirements in the oil and gas, chemical and pharmaceutical industries. Stainless Steel 317 Ferrule Tube Fittings has a carbon content restricted to exclude the lower end of Alloy 317 range, so is the grade of choice for high temperature applications.

Stainless Steel 317 Double Ferrule Tube Fittings have excellent toughness, even down to cryogenic temperatures, although other grades are normally used in sub – zero environments. 317 Stainless Steel Ferrule Tube Fittings is molybdenum comportment austenitic stainless steel by method for higher molybdenum substance. 317 Stainless Steel Double Ferrule Tube Fittings provides higher creep, tensile strength, and stress – to – rupture, at high temperatures than regular stainless steels

Stainless Steel 317 Tube to Male Fittings Specifications

Specifications : ASTM A276 ASME SA 479
Tube Size : 6mm to 38mm to 1/4″ to 1 1/2″
Thread
: NPT, BSP, BSPT, UNF, ISO, SAE etc.
Brass : ASTM B16 ASTM B 453
Pressure Rating : 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass

SS 317 Tube To Male Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.845 min

Stainless Steel 317 Tube To Male Fittings Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Ferrule Fitting Tube To Male Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317

SS 317 Tube To Male Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 317 Tube To Male Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)