Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316Ti Bolt And Nuts, which exhibits excellent resistance in a variety of atmospheres and temperatures, along with the corrosion and oxidation that occurs over time. Stainless Steel 316Ti Hex Head Bolts is often applied in areas of higher temperatures than Type 304 can endure, and its low carbon allows it to be resistant against carbon precipitation. However, like many stainless steels, Stainless Steel 316Ti Hex Head Nuts is susceptible to warm chlorine environments and can potential pit and crack.

This utilized the widely applicable properties of Stainless Steel 316Ti Square Bolts and meets the individual specifications for each. Additionally, the lower amount of carbon in its composition gives Stainless Steel 316Ti Square Nuts utilization in areas where high temperature gases may pose a problem. As such, Stainless Steel 316Ti Eye Bolts is commonly applied in the manufacturing of furnaces, exhaust systems and containers exposed to high temperatures.

Stainless Steel 316Ti Bolt

Stainless Steel 316Ti Eye Nuts is additionally characterized by its resistance to oxidation and creep, along with its ability to withstand high temperatures. Moist environments have no effect on Stainless Steel 316Ti U-Bolts, due to the higher levels of nickel and chromium in its makeup. Because of this, Stainless Steel 316Ti Wing Nuts is often utilized in marine environments in place of Stainless Steel 304, as it displays a higher resistance.

SS 316Ti Bolt/Nut Specifications

Specifications : ASTM A 193 ASME SA 193
Standard : DIN, ASTM, BS and all International Standards
Length : 3 mm to 200 mm
Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Type : Hex Head Bolts, Square Bolts, U bolts, Eye bolts, T bolt, Hex Bolt, Lag Bolts, Counter sunk Bolts, Hex Head nuts, Square nuts, Lock nuts, Eye nuts, wing nuts, T nuts, Panel Nuts, Coupling Nuts, Dome nuts, Acorn Nuts.

316Ti Stainless Steel Bolt/Nut Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
316Ti min. 16.0 2.00 10.0
max. 0.08 2.0 0.75 0.045 0.030 18.0 3.00 14.0

Stainless Steel 316Ti Bolt/Nut Mechanical Properties

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Hardness
Rockwell B (HR B) max Brinell (HB) max
316Ti 515 205 35 75 205

Stainless Steel 316Ti Bolt/Nut Physical Properties

Grade Density (kg/m3) Elastic Modulus (GPa) Mean Coefficient of Thermal Expansion (m/m/0C) Thermal Conductivity (W/m.K) Specific Heat 0-1000C (J/kg.K) Electrical Resistivity (n.m)
0-1000C 0-3150C 0-5380C at 1000C at 5000C
316Ti 8000 193 17.2 17.8 18.4 16.2 21.5 500 720

Equivalent Grades for 316Ti Stainless Steel Bolt/Nut

Grade UNS No Old British Euronorm GOST Japanese JIS
BS En No AFNOR
316Ti S31635 320S31 X6CrNiMoTi17-12-2 1.4571 Z6CNDT17‐12 08Ch17N13M2T SUS 316Ti

SS 316Ti Bolt/Nut Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

316Ti Steel Bolt/Nut Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 316Ti Bolt
Stainless Steel 316Ti Bolt Manufacturer 1

Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High Quality Stainless Steel 316Ti Bolt And Nuts, which exhibits excellent resistance in a variety of atmospheres and temperatures, along with the corrosion and oxidation that occurs over time. Stainless Steel 316Ti Hex Head Bolts is often applied in areas of higher temperatures than Type 304 can endure, and its low carbon allows it to be resistant against carbon precipitation. However, like many stainless steels, Stainless Steel 316Ti Hex Head Nuts is susceptible to warm chlorine environments and can potential pit and crack.

Product Brand: Sachiya Steel International

Product Currency: INR

Product Price: 50

Product In-Stock: InStock

Editor's Rating:
5