Stainless Steel 316 Plates Stockist In India

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Stainless Steel 316 Plates, Sheets, Coils, which are usually limited in use to relatively thin sections due to lack of toughness in welds. However, where welding is not required, Stainless Steel 316 Sheets offer a wide range of applications. High Chromium with additions of Molybdenum can be used for these Stainless Steel 316 Plates in quite aggressive conditions such as sea water. Stainless Steel 316 Coils are also chosen for their resistance to stress corrosion cracking, which are further not as formable as austenitic stainless steels.

These Stainless Steel 316L Sheets are magnetic, which cannot be hardened by heat treatment. Stainless Steel 316L Plates are the most common, where their microstructure is derived from the addition of Nickel, Manganese and Nitrogen. These Stainless Steel 316L Coils is the same structure as occurs in ordinary steels at much higher temperatures. This structure gives these Stainless Steel 316 Slating Coils their characteristic combination of weldability and formability.

Corrosion resistance of these Stainless Steel 316 Perforated Coils can be enhanced by adding Chromium, Molybdenum and Nitrogen. SS 316L Slating Coils cannot be hardened by heat treatment but have the useful property of being able to be work hardened to high strength levels whilst retaining a useful level of ductility and toughness. These standard u>SS 316L Perforated Coils are vulnerable to stress corrosion cracking.

Stainless Steel 316 Plates

Stainless Steel 316/316L Sheet, Plate & Coil Specifications

Specifications : ASTM A240 / ASME SA240
Thickness : 4mm-100mm
Width
: 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand
blast, Brush, etching, etc
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.

SS 316/316L Plate, Sheet & Coil Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 316 0.08 max 2 max 1.0 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 11.00 – 14.00 67.845 min
SS 316L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 10.00 – 14.00 68.89 min

Stainless Steel 316/316L Sheets, Plates & Coils Mechanical Properties

Grade Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
SS 316 8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
SS 316L 8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316/316L Stainless Steel Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3

SS 316/316L Sheets, Plate & Coils Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Stainless Steel 316/316L Sheets, Plate & Coils Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Stainless Steel 316 Plates
Stainless Steel 316 Plates

Sachiya Steel International Is One Of The Leading Stockist And Exporter Of High Quality Stainless Steel 316 Plates, Sheets, Coils, which are usually limited in use to relatively thin sections due to lack of toughness in welds. However, where welding is not required, Stainless Steel 316 Sheets offer a wide range of applications. High Chromium with additions of Molybdenum can be used for these Stainless Steel 316 Plates in quite aggressive conditions such as sea water. Stainless Steel 316 Coils are also chosen for their resistance to stress corrosion cracking, which are further not as formable as austenitic stainless steels.

Product Brand: Sachiya Steel International

Product Currency: INR

Product Price: 180

Product In-Stock: InStock

Editor's Rating:
5