Incoloy Alloy 825 Wire Manufacturers In India
Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Incoloy Alloy 825 Wire, where annealing is done at 1750 Degree F (954 Degree C) with rapid air cool. The resistant to pitting and crevice corrosion of Incoloy 825 Wire and with appropriate heat treating, it is stable against the sensitization to inter – granular corrosion. Incoloy 825 Coil Wire has good mechanical properties at both room and elevated temperatures up to approximately 1000 Degree F. Incoloy 825 Wire offers exceptional resistance to corrosion by sulfuric and phosphoric acids and is often the most cost effective alloy in sulfuric acid service.
Incoloy 825 Wire is often used in Radioactive waste handling, Nuclear fuel reprocessing, Marine exhaust systems, Pickling tank heaters, tanks, and equipment. Incoloy 825 Wire has good weldability by all conventional processes, and is developed to provide exceptional corrosion resistance in both oxidizing and reducing environments. Alloy 825 Filler Wire, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids.
Typical applications of Alloy 825 Coil Wire are: phosphoric acid evaporators; pickling – tank heater, pickling hooks and equipment; etc. Alloy 825 Wire is also used in chemical processing, acid production, oil and gas well piping, propeller shafts, and more. Alloy 825 Wire is characterized by good resistance to chloride – induced pitting and crevice corrosion.
Incoloy Alloy 825 Wire Specifications |
||
| Specifications | : | AMS 5542 / ASTM B425 ASME SB425 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
825 Incoloy Alloy Wire Chemical Composition
| Grade | C | Mn | Si | S | Al | Fe | Ni | Cr | Cu | Ti |
| 825 | 0.05 max | 1.00 max | 0.05 max | 0.03 max | 0.02 max | 22.0 min | 38.0-46.0 | 19.50-23.50 | 1.50-3.00 | 0.06 – 1.20 |
Incoloy 825 Filler Wire Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Equivalent Grades for 825 Incoloy Wire
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Incoloy 825 Wire Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
825 Incoloy Wire Test Certificates
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc
Material Testing
We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
Documentation
• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)
Incoloy Alloy 825 Wire
Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Incoloy Alloy 825 Wire, where annealing is done at 1750 Degree F (954 Degree C) with rapid air cool. The resistant to pitting and crevice corrosion of Incoloy 825 Wire and with appropriate heat treating, it is stable against the sensitization to inter – granular corrosion. Incoloy 825 Coil Wire has good mechanical properties at both room and elevated temperatures up to approximately 1000 Degree F. Incoloy 825 Wire offers exceptional resistance to corrosion by sulfuric and phosphoric acids and is often the most cost effective alloy in sulfuric acid service.
Product Brand: Sachiya Steel International
Product Currency: INR
Product Price: 180
Product In-Stock: InStock
5
