LOGO 1200 X 300

Threaded Forged Fittings

Stainless Steel 347 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 347 Threaded Forged Fittings, which covers a wide range of alloys with different properties. One property common to Stainless Steel 347 Forged Threaded Elbow is that they contain at least 12 % chromium. Importance of alloying elements Stainless Steel 347 Forged Threaded Tee contains at least 18 % chromium and 8 % nickel – thus the well-known designation 18 / 8 steel. In alloys with 12 % – 13 % chromium, the passive layer is strong enough to prevent Stainless Steel 347 Forged Threaded Cross from corroding in normal or mildly aggressive media.

The main effect of the alloying element nickel is on the structure of Stainless Steel 347 Forged Threaded Cap and its mechanical properties. The structure of Stainless Steel 347 Forged Threaded Fittings is austenitic with an adequate content of nickel, where corrosion resistance generally increases with increasing content of chromium.

In contrast to the pure chromium steels (ferritic stainless steel), Stainless Steel 347 Forged Threaded Coupling results in significant changes in the mechanical properties, such as increased workability and ductility, better resistance to thermal stress and improved weldability. The austenitic structure of Stainless Steel 347 Forged Threaded Union also results in a change in the physical properties of the steel. Hot working of Stainless Steel 347 Forged Threaded Bushing should be avoided below 927 Degree C.

Stainless Steel 347 Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 347 Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Cb Ni Fe
SS 347 0.08 max 2 max 1.00 max 0.045 max 0.030 max 17.00 – 20.00 10xC – 1.10 9.00 – 13.00 62.74 min

Stainless Steel 347 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 347 Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 347 1.4550 S34700 SUS 347 – 08Ch18N12B – X6CrNiNb18-10

Stainless Steel 347 Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 347 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-27T15:56:37+05:30September 1st, 2021|

Stainless Steel 321 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is a one of the Leading Manufacturer And Exporter of Stainless Steel 321 Threaded Forged Fittings, where post weld heat treatment is not necessary. Stainless Steel 321 Forged Threaded Fittings is used for welding under conditions which prevent a post-weld anneals. Some typical areas of application of Stainless Steel 321H Forged Threaded Fittings are furnace components. Stainless Steel 321 Forged Threaded Elbow Fittings cannot be hardened by thermal treatment, but strength and hardness can be increased substantially by cold working, with subsequent reduction in ductility.

The added titanium content of minimum five times the carbon % content (max 0.7 %) means that Stainless Steel 321H Forged Threaded Tee Fittings also possesses good creep strength and good resistance to chromium carbide precipitation. Special consideration in Stainless Steel 321 Forged Threaded Cross Fittings is required to avoid weld “hot cracking” by assuring formation of ferrite in the weld deposit. Stainless Steel 321H Forged Threaded Cap Fittings is often used for Expansion joints and Thermal oxidizers.

Stainless Steel 321 Forged Threaded Bend Fittings is similar to Type 304 stainless steel; however, it contains a Titanium addition of at least five times the carbon content. Stainless Steel 321H Forged Threaded Coupling Fittings is also used for Bellows and Furnace parts. Stainless Steel 321 Forged Threaded Union Fittings is used principally for applications involving welding or sustained elevated temperature operations where re-annealing is not practical.

Stainless Steel 321/321H Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 321/321H Forged Fittings Chemical Composition

Grade C Mn Si P S Cr N Ni Ti
SS 321 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 5(C+N) – 0.70 max
SS 321H 0.04 – 0.10 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 19.00 0.10 max 9.00 – 12.00 4(C+N) – 0.70 max

Stainless Steel 321 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1457 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 321 Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS EN
SS 321 1.4541 S32100 SUS 321 X6CrNiTi18-10
SS 321H 1.4878 S32109 SUS 321H X12CrNiTi18-9

Stainless Steel 321/321H Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 321/321H Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-29T11:42:41+05:30September 1st, 2021|

Stainless Steel 317L Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 317L Threaded Forged Fittings, which show a much smaller rate of abrasion volume loss with increase in abrasion velocity than the austenitic steels. Stainless Steel 317L Forged Threaded Elbow derive their outstanding properties from their capacity to resist unstable fracture of micro shear lips on the abraded surface. This is due to the strain capacity in Stainless Steel 317L Forged Threaded Tee afforded by the mechanical inducement of the martensitic phase transformations and the high work – hardening characteristics of the transformation product.

The influence of this transformation has been studied as a function of prior cold work and velocity of abrasion on a range of austenitic Stainless Steel 317L Forged Threaded Cross. Notwithstanding these advantages of the austenitic grades, Stainless Steel 317L Forged Threaded Cap are superior in terms of cost per unit volume lost and the new ferritic – martensitic steel designated has potential as an abrasion ­ resisting material in corrosive environments.

Complex design requirements can make Stainless Steel 317L Forged Threaded fittings necessary to combine different metallic materials within the same component. Also, chance combinations can often be found in Stainless Steel 317L Forged Threaded Coupling, governed only by the availability of, for instance, fasteners or shims. In certain circumstances, such mixed – material designs of Stainless Steel 317L Forged Threaded Union can lead to corrosion in one of the partner materials.

Stainless Steel 317L Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 317L Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.89 min

Stainless Steel 317L Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317L Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317L 1.4438 S31703 SUS 317L – – – X2CrNiMo18-15-4

Stainless Steel 317L Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 317L Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-29T17:56:23+05:30August 30th, 2021|

Stainless Steel 317 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of high quality Stainless Steel 317 Threaded Forged Fittings, which is the basic stainless steel. Like most non – stainless steels, our Stainless Steel 317 Forged Threaded Elbow can be hardened by a “quench-and-temper” heat treatment. These Stainless Steel 317 Forged Threaded Tee contains a minimum of 11.5 percent chromium, just sufficient to give corrosion resistance properties. Our Stainless Steel 317 Forged Threaded Cross achieves maximum corrosion resistance when it has been hardened and tempered and then polished.

These Stainless Steel 317 Forged Threaded Cap is a general purpose grade often supplied in the hardened, but still machinable condition, for applications where high strength and moderate heat and corrosion resistance are required. Our Stainless Steel 317 Forged Threaded fittings are optimized for high hardness, and other properties are to some degree compromised. Fabrication of these Stainless Steel 317 Forged Threaded Coupling must be by methods that allow for poor weldability and usually the need for a final heat treatment.

Corrosion resistance of our Stainless Steel 317 Forged Threaded Union is lower than that of the common austenitic grades. Useful operating temperature range of these Stainless Steel 317 Forged Threaded Bushing is limited by their loss of ductility at sub – zero temperatures and loss of strength by over – tempering at elevated temperatures.

Stainless Steel 317 Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 317 Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2 max 1.00 max 0.045 max 0.030 max 18 – 20 3.00 – 4.00 11.00 – 15.00 57.845 min

Stainless Steel 317 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 317 Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 317 1.4449 S31700 SUS 317 3304S11 – – –

Stainless Steel 317 Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 317 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2023-12-30T15:03:05+05:30August 30th, 2021|

Stainless Steel 316Ti Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 316Ti Threaded Forged Fittings, which is an austenitic stainless steel formulated for primary forming into wrought products. These Stainless Steel 316Ti Forged Threaded Elbow is chromium – nickel based steel that possesses increased levels of resistance against several substances, due to the addition of molybdenum in its composition. The molybdenum allows our Stainless Steel 316Ti Forged Threaded Tee to be more resistance to corrosion overall, by means of specific resistance against chlorine pitting.

This Stainless Steel 316Ti Forged Threaded Cross is also found to be more applicable in areas with high or elevated temperatures compared to other stainless steels. Our Stainless Steel 316Ti Forged Threaded Cap has more heat resistance than SS 304 but otherwise possesses a lot of of the same general characteristics. The corrosion resistance of these Stainless Steel 316Ti Forged Threaded Fittings is especially effective against chemicals, such as those used in the paper and textile industries.

Our Stainless Steel 316Ti Forged Threaded Coupling finds other common applications in food processing equipment, chemical processing, nuts and bolts, and medical implants. While the metal is pliable under hot and cold – working techniques, these Stainless Steel 316Ti Forged Threaded Union cannot be work hardened with heat treatment and in general is considered to have lower weldability compared to the 304 type stainless steels.

Stainless Steel 316TI Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 316TI Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 316TI 0.08 max 2 max 0.75 max 0.045 max 0.030 max 16.00 – 18.00 2.00 – 3.00 10.00 – 14.00 68.395 min

Stainless Steel 316TI Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1399 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316TI Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316TI 1.4571 S31635 SUS 316Ti 320S31 08Ch17N13M2T Z6CNDT17‐123 X6CrNiMoTi17-12-2

Stainless Steel 316TI Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 316TI Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-01-04T16:11:26+05:30August 28th, 2021|

Stainless Steel 316 Threaded Forged Fittings Manufacturers In India

Stainless Steel 316 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter for Stainless Steel 316 Threaded Forged Fittings, which is introduced to the Oil and Gas industry when it was selected for natural gas pipelines. In addition, the appropriate Stainless Steel 316 Threaded Forged Elbow for an industrial project can lead to less lifetime maintenance and inspection costs, along with less production downtime costs. In the case of architectural projects, the right Stainless Steel 316L Threaded Forged Tee can hold up to some of the worst environments, and still retain its beauty over time.

This can reduce lifetime painting and cleaning expenditures of Stainless Steel 316 Threaded Forged Cross that may be needed as compared to alternative materials. Furthermore, Stainless Steel 316L Threaded Forged Cap usage contributes to LEED’s certification, which helps increase the value of a project. Finally, at the end of life for a project, Stainless Steel 316 Threaded Forged Fittings has high scrap value.

Stainless Steel 316 Threaded Forged Fittings

It is interesting to note that as society and governments are becoming more conscious of environmental and economic factors, the growth in the use of Stainless Steel 316L Threaded Forged Coupling has been the highest of any material in the world. This helps in highlighting a growing amount of awareness of Stainless Steel 316 Threaded Forged Union in regard to how to make responsible decisions when it comes to material selection.

Stainless Steel 316/316L Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 316/316L Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 316 0.08 max 2 max 1.00 max 0.045 max 0.030 max 16 – 18 2.0 – 3.0 11 – 14 67.845 min
SS 316L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 16 – 18 2.0 – 3.0 10 – 14 68.89 min

Stainless Steel 316/316L Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 316/316L Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 316 1.4401 / 1.4436 S31600 SUS 316 316S31 / 316S33 – Z7CND17‐11‐02 X5CrNiMo17-12-2 / X3CrNiMo17-13-3
SS 316L 1.4404 / 1.4435 S31603 SUS 316L 316S11 / 316S13 03Ch17N14M3 / 03Ch17N14M2 Z3CND17‐11‐02 / Z3CND18‐14‐03 X2CrNiMo17-12-2 / X2CrNiMo18-14-3

Stainless Steel 316/316L Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 316/316L Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-22T11:36:21+05:30August 28th, 2021|

Stainless Steel 304H Threaded Forged Fittings Manufacturers In India

Stainless Steel 304H Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is Leading Manufacturer And Exporter for Stainless Steel 304H Threaded Forged Fittings, which should be heated to 1900 Degree F minimum and water quenched or rapidly cooled by other means. The high Sulphur content of Stainless Steel 304H Forged Threaded Elbow also has a detrimental impact on hot workability. If hot forming is required, once again, Stainless Steel 304H Forged Threaded Teeshould be considered as an alternate selection. The cold work hardening rate of Stainless Steel 304H Forged Threaded Cross makes it less machinable than 410 stainless steel, but similar to 304.

It is common for Stainless Steel 304H Forged Threaded Cap to be dual certified as 317 and 317L when the material meets the lower carbon limit of SS 317L. Avoid working Stainless Steel 304H Forged Threaded Fittings below 1700 Degree F (927 Degree C). For optimum corrosion resistance, a post – work annealing of Stainless Steel 304H Forged Threaded Coupling is recommended. Stainless Steel 304H Forged Threaded Union may be formed and fabricated through a full range of cold working operations.

Stainless Steel 304H Threaded Forged Fittings

It can be used in heading, drawing, bending, and upsetting. Any cold working operations of Stainless Steel 304H Forged Threaded Bushing will increase the strength and hardness of the material. Stainless Steel 304H Forged Threaded Plug is a tough austenitic stainless steel subject to work hardening during deformation and is resistant to chip breaking.

Stainless Steel 304H Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 304H Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304H 0.10 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 – 8 – 10.5 –

Stainless Steel 304H Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 304H Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304H 1.4301 S30409 – – – – –

Stainless Steel 304H Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304H Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-06T12:48:23+05:30August 27th, 2021|

Stainless Steel 310 Threaded Forged Fittings Manufacturers In India

Stainless Steel 310 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron. After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars. Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel. Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.

Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF. Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production. The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages. Stainless Steel 310 Forged Threaded Union remain in use for decades before they can be recycled.

Therefore, there is not enough recycled Stainless Steel 310S Forged Threaded Bushing to meet growing demand using the EAF steelmaking method alone. Demand of Stainless Steel 310 Forged Threaded Plug is met through a combined use of different production methods. All of these production methods can use recycled Stainless Steel 310S Forged Threaded Hex Plus as an input, where it contains recycled steel.

Stainless Steel 310 Threaded Forged Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 310/310S Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni Fe
SS 310 0.015 max 2 max 0.15 max 0.020 max 0.015 max 24 – 26 0.10 max 19 – 21 54.7 min
SS 310s 0.08 max 2 max 1.00 max 0.045 max 0.030 max 24 – 26 0.75 max 19 – 21 53.095 min

Stainless Steel 310/310S Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1402 °C (2555 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 40 %

Equivalent Grades for 310/310S Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 310 1.4841 S31000 SUS 310 310S24 20Ch25N20S2 – X15CrNi25-20
SS 310S 1.4845 S31008 SUS 310s 310S16 20Ch23N18 – X8CrNi25-21

Stainless Steel 310/310S Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 310/310S Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-27T15:43:09+05:30August 27th, 2021|

Stainless Steel 304L Threaded Forged Fittings Manufacturers In India

Stainless Steel 304L Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 304L Threaded Forged Fittings, which can be easily welded and processed by standard shop fabrication practices. The austenitic structure of Stainless Steel 304L Threaded Forged Elbow also gives this grade excellent toughness, even down to cryogenic temperatures. Stainless Steel 304L Threaded Forged Teedoes not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid.

Stainless Steel 304L Threaded Forged Cross Performs well in fresh water service with low levels of chlorides, whereas at higher chloride levels the grade is susceptible to crevice corrosion and pitting. Working temperatures of 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) in Stainless Steel 304L Threaded Forged Cap are recommended for most hot working processes. The best machining results in Stainless Steel 304L Threaded Forged Fittings are achieved with slower speeds, heavier feeds, excellent lubrication, sharp tooling and powerful rigid equipment.

For maximum corrosion resistance, Stainless Steel 304L Threaded Forged Coupling should be annealed at 1900 Degree F (1038 Degree C) minimum and water quenched or rapidly cooled by other means after hot working. Stainless Steel 304L Threaded Forged Union is not suitable for use with sulphide, nitric acid, acid chromates, or oxidizing salts such as ferric chloride. Stainless Steel 304L Threaded Forged Bushing with more than 10 % aluminum content can be heat treated, further increasing their tensile strength.

Stainless Steel 304L Forged Threaded Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 304L Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304L 0.030 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 – 8 – 20 0.10 max

Stainless Steel 304L Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 304L Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304L 1.4306 / 1.4307 S30403 SUS 304L 3304S11 03Х18Н11 Z3CN18‐10 X2CrNi18-9 / X2CrNi19-11

Stainless Steel 304L Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304L Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-05T17:50:00+05:30August 26th, 2021|

Stainless Steel 304 Threaded Forged Fittings Manufacturers In India

Stainless Steel 304 Threaded Forged Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 304 Threaded Forged Fittings, which provides a combination of corrosion resistance and strength not found in any other commercial material available in its price range. Components of Stainless Steel 304 Forged Threaded Elbow using the combination of excellent corrosion restainless-steel-304-threaded-forged-fittings-supplier-exportersistance and high strength currently include pumps, valves and fittings, fasteners, cables.

Stainless Steel 304 Forged Threaded Tee has corrosion resistance greater than that provided by Types 316 and 316L, plus approximately twice the yield strength at room temperature. The additions of Silicon and Manganese have given Stainless Steel 304 Forged Threaded Cross a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths of Stainless Steel 304 Forged Threaded Cap are attainable through cold working the material and are still fully austenitic after severe cold – working. In addition, Stainless Steel 304 Forged Threaded Fittings has very good mechanical properties at both elevated and sub – zero temperatures.

And, unlike many austenitic stainless steels, Stainless Steel 304 Forged Threaded Coupling does not become magnetic when cold worked. The benefit to the cold or hot work put into Stainless Steel 304 Forged Threaded Union is added strength and hardness, and the wear resistance does not decrease noticeably. Chromium and Nickel additions give excellent corrosion to Stainless Steel 304 Forged Threaded Bushing, while having approximately twice the yield strength.

Stainless Steel 304 Threaded Forged Fittings

Stainless Steel 304 Threaded Forged Fittings Specifications
Specifications : ASTM A182 & ASME SA182
Size : 1/8” NB to 4” NB (Socket weld & Screwed-Threaded)
Standards
 : ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799
Class : 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS
Type : Threaded Fittings

SS 304 Forged Fittings Chemical Composition

Grade C Mn Si P S Cr Mo Ni N
SS 304 0.08 max 2 max 0.75 max 0.045 max 0.030 max 18 – 20 – 8 – 11 –

Stainless Steel 304 Threaded Fitting Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %

Equivalent Grades for 304 Stainless Steel Forged Fittings

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 304 1.4301 S30400 SUS 304 304S31 08Х18Н10 Z7CN18‐09 X5CrNi18-10

Stainless Steel 304 Forged Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

SS 304 Forged Threaded Fittings Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-06T19:07:27+05:30August 26th, 2021|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top