LOGO 1200 X 300

Buttweld Fittings

Titanium Gr 5 Buttweld Fittings Manufacturers In India

Sachiya Steel International is one of the leading Manufacturer and Exporter of Titanium Gr 5 Buttweld Fittings, where they are in tandem with international quality standards and are manufactured using high quality material. These Titanium Grade 5 Elbow Butt Weld Pipe Fittings is a fantastic material, which is difficult to work with, but so rewarding when it can be pulled off. Our Titanium Grade 5 Tee Butt Weld Pipe Fittings is high – strength alloy which can be used at cryogenic temperatures up to about 800 Degree F (427 Degree C). Often referred to as the “work horse” grade, these Titanium Grade 5 Cross Butt Weld Pipe Fittings is most commonly found in the annealed condition.

Meanwhile, Titanium Grade 5 Reducer are also being offered in different sizes and shapes to our customers. We offer processing services and a fully automated magazine feed rod blanking line for these Titanium Grade 5 Bend Pipe Fittings, where we can process your material to your exact requirements.

Titanium Grade 5 Stub End Butt Weld Pipe Fittings has excellent corrosion resistance in oxidizing conditions, and is effectively immune from stress corrosion cracking, pitting corrosion and crevice corrosion in chloride solutions below 70 Degree C. These Titanium Grade 5 End Cap is the most formable and corrosion resistant amongst the pure grades of Titanium is biocompatible and also has excellent tri-biological properties.

Titanium Gr 5 Pipe Fittings Specifications
Specifications : ASTM B363 / ASME SB363
Size : 1/2″ to 24″ NB to 24″NB in
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Titanium Gr 5 Pipe Fittings Chemical Composition

Titanium Gr 5 C Ti N Fe H O V Al
0.10 max 90 min 0.05 max 0.40 max 0.015 max 0.20 max 3.5-4.5 5.5-6.75 max

Titanium Gr 5 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
4.43 g/cm3 1632 °C (2970 °F) Psi – 128000 , MPa – 880 Psi – 138000 , MPa – 950 14 %

Equivalent Grades for Gr 5 Titanium Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Titanium Gr 5 R56400 3.7165

Titanium Alloy Gr 5 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Gr 5 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-20T18:03:06+05:30August 19th, 2021|

Hastelloy B3 Buttweld Fittings Manufacturer In United Arab Emirates

Hastelloy B3 Buttweld Fittings Manufacturer In United Arab Emirates

Sachiya Steel International Private Limited stands out as an exceptional supplier in the United Arab Emirates (UAE), being known for providing top-of-the-line Hastelloy B3 buttweld fittings at competitive rates. In this article, we will delve deeper into Hastelloy B3’s excellence as well as why our company should be considered your number one option when looking for Hastelloy B3 fittings in UAE.

What Is Hastelloy B3?

Hastelloy B3 is a nickel-molybdenum alloy known for its outstanding resistance to various aggressive chemicals. Due to this property, Hastelloy B3 has become increasingly popular in industries where corrosion resistance is essential, making it a go-to material in different applications. Due to its versatility, durability and reliability it has found widespread application within various fields.

Hastelloy B3 Buttweld Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Hastelloy B3 Pipe Fittings Chemical Composition

Hastelloy B3 Ni C Mo Mn Si Fe Cu Ti Co Cr
65.0 min 0.01 max 28.5 3.0 max 0.10 max 1.5 0.20 max 0.2 max 3.0 max 1.5

Equivalent Grades for B3 Hastelloy Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Hastelloy B3 N010675 2.4600

Sachiya Steel International Private Limited – Your Trusted Partner:

As a renowned manufacturer of Hastelloy B3 buttweld fittings in the UAE, Sachiya Steel International Private Limited has set the benchmark for excellence and reliability. Here’s why we are the preferred choice for many industries in the UAE:

Quality Assurance: At our facility, we adhere to industry-high quality standards when manufacturing Hastelloy B3 buttweld fittings. Each of our products undergoes stringent quality tests before being released for sale – keeping full traceability throughout our manufacturing processes.

Wide Range of Products: Sachiya Steel International Private Limited provides an extensive selection of Hastelloy B3 buttweld fittings, including elbows, tees, reducers and couplings in Hastelloy B3 material to meet the diverse needs of its customers. No matter their size or design specifications we can meet them.

Customization: Every project is different, which is why we provide tailored solutions tailored specifically to meet your requirements. Our experts work closely with you to design and manufacture fittings which perfectly suit your application.

Timely Delivery: Our prompt delivery services take great pride in their reliability; when you choose us, you can rest easy knowing that your order will always reach you on time, every time.

Competitive Pricing: Sachiya Steel International Private Limited provides competitive prices without compromising the quality of our Hastelloy B3 buttweld fittings, and pride ourselves in offering cost-effective solutions to our clients.

Global Presence: While we manufacture in the UAE, our reach extends worldwide. We have established ourselves as reliable suppliers in various countries around the globe to ensure you have access to our top-quality products no matter where they may be.

Hastelloy Alloy B3 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Why choose Hastelloy B3 Buttweld Fittings?

Hastelloy B3 provides many advantages, including:

Exceptional Corrosion Resistance: Hastelloy B3’s exceptional corrosion resistance makes it an excellent choice for industries where corrosion protection is of utmost importance, such as aerospace.

High Heat Resistance: These fittings retain their mechanical properties even at elevated temperatures, making them suitable for high-temperature applications.

Superior Strength: Hastelloy B3 offers exceptional strength and durability, guaranteeing long service lives.

Ease of Welding: These buttweld fittings are easy to weld, making installation and maintenance much simpler.

Hastelloy B3 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

By |2023-10-14T18:19:51+05:30August 19th, 2021|

Titanium Gr 2 Buttweld Fittings Manufacturers In India

Titanium Gr 2 Buttweld Fittings Manufacturers In India

Sachiya Steel International offers a wide range of Titanium Gr 2 Buttweld Fittings, which are manufactured keeping in mind the variegated requirements of our esteemed customers. In addition to this, we offer these Titanium grade 2 Pipe Elbow in a spectrum of sizes and dimensions at reasonable rates. We also offer these products in different grades such as Titanium Grade 2 Butt Weld Pipe Reducer and Titanium Grade 5 Butt Weld Pipe Fittings.

In addition, these Titanium UNS R50400 Butt Weld Fittings also offer some excellent features such as dimensionally stable, fine finish, high material strength, and more. Meanwhile, these products are also being offered in different sizes and shapes to our customers. We also offer the same at best prices.

Titanium Gr 2 Buttweld Fittings Specifications
Specifications : ASTM B363 / ASME SB363
Size : 1/2″ to 24″ NB to 24″NB in
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Titanium Gr 2 Pipe Fittings Chemical Composition

Titanium Gr 2 C Ti N Fe H O V Al
0.1 max 99.2 min 0.03 max 0.3 max 0.015 max 0.25 max – –

Titanium Gr 2 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
4.5 g/cm3 1665 °C (3030 °F) Psi – 39900 , MPa – 275 Psi – 49900 , MPa – 344 20 %

Equivalent Grades for Gr 2 Titanium Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Titanium Gr 2 R50400 3.7035

Titanium Gr 2 Buttweld Fittings

Titanium Alloy Gr 2 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Titanium Gr 2 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-03-26T12:50:29+05:30August 18th, 2021|

Super Duplex S32750 Buttweld Fittings Manufacturers In India

Super Duplex S32750 Buttweld Fittings Manufacturers In India

Sachiya Steel International is one of the leading Manufacturer And Exporter of Super Duplex S32750 Buttweld Fittings, where our quality controllers stringently check the entire range on different parameters to ensure about flawlessness. These Super Duplex S32750 Elbow Pipe Fittings is designed to feature high strength, resistance to pitting, stress corrosion cracking, erosion corrosion and corrosion fatigue, crevice corrosion and strong weldability. Providing higher strength than both austenitic and 22 percent Cr, our Super Duplex S32760 Tee Butt Weld Pipe Fittings is suited to a variety of applications in industries such as Chemical Processing, Oil & Gas, and Marine environments.

Meanwhile, these Super Duplex S32760 Cross Pipe Fittings are as well being offered in different sizes and shapes to our customers. We also offer these Super Duplex S32750 Reducer Butt Weld Pipe Fittings at best prices. Solution treatment (annealing) – heat for these Super Duplex Steel S32750 Stub End Butt Weld Pipe Fittings is up to 1020 Degree C – 1100 Degree C and cool rapidly.

Our Super Duplex Steel S32760 Bend has higher strength which is around twice that of Type 304 austenitic stainless steel. This leads to reduced plate thicknesses in these Super Duplex Steel S32750 Pipe End Cap being used in fabrications reducing the weight which is of particular significance in items such as pressure vessels, storage tanks, and structural applications such as bridges.

Super Duplex S32750/ S32760 Pipe Fittings Specifications
Specifications : ASTM A815 / ASME SA815
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

 

Super Duplex S32750 Buttweld Fittings

Super Duplex S32750/ S32760 Pipe Fittings Chemical Composition

S32750 / S32760 C N P Si Mn Mo Ni Cr S Other
0.030 0.24/0.32 0.035 0.80 1.20 3.0/5.0 6.00/8.00 24.0/26.0 0.020 Cu:0.50

Super Duplex S32750/ S32760 Buttweld Fittings Mechanical Properties

S32750 / S32760 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Equivalent Grades for S31803 / S32205 Super Duplex Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Super Duplex 2507
 S32750 / S32760
 1.4410

Super Duplex S32750/ S32760 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Super Duplex Steel S32750/ S32760 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-02-21T16:43:25+05:30August 18th, 2021|

Carbon Steel ASTM A860 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is Leading Manufacturer And Exporter of Carbon Steel ASTM A860 Buttweld Fittings, where the machining and welding of this specification presents no particular problems. Material to ASTM A860 Carbon Steel Long Radius Elbow Butt Weld Pipe Fittings is described as a super stainless steel with a microstructure of 50 /50 austenite and ferrite. ASME SA 860 Carbon Steel Equal Tee Butt Weld Pipe Fittings combines high mechanical strength and good ductility with outstanding corrosion resistance to marine environments and a wide, diverse range of oil & gas production environments.

Containing 25 % chromium, 7 % nickel, 3.6 % molybdenum as well as copper, tungsten, and nitrogen, ASTM A860 Carbon Steel Concentric Reducer is a highly alloyed super duplex stainless steel with high PREN for use in aggressive environments. Sachiya Steel International is also one of the well – known distributor and trader of ASME SA 860 Carbon Steel Cross Butt Weld Pipe Fittings, which has a ferrite austenitic microstructure. ASTM A860 Carbon Steel Lateral Tee Pipe Fittings consists of around 40 % – 50 % ferrite in the annealed condition.

Carbon Steel ASTM A860 Buttweld Fittings | Carbon Steel ASTM A860 Buttweld Fittings | Carbon Steel ASTM A860 Buttweld Fittings | Carbon Steel ASTM A860 Buttweld Fittings | Carbon Steel ASTM A860 Buttweld Fittings | Carbon Steel ASTM A860 Buttweld Fittings | Carbon Steel ASTM A860 Buttweld Fittings | Carbon Steel ASTM A860 Buttweld Fittings | Carbon Steel ASTM A860 Buttweld Fittings

The microstructure of ASME SA 860 Carbon Steel Long Stub End has the high strength of the ferrite grades whilst retaining the corrosion resistance of the austenitic grades. Even when welded, ASTM A860 Carbon Steel Dish Cap Pipe Fittings displays only slightly lower impact strength.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Carbon Steel ASTM A860 Pipe Fittings Specifications
Specifications : ASTM A860 / ASME SA860
Size : 1/8” NB TO 48” NB.
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Type : Seamless / Welded / Fabricated
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Grades : WPBW, WPHY 42, WPHY 46, WPHY 52, WPHY 60, WPHY 65 & WPHY 70.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel ASTM A860 Butt weld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Carbon Steel ASTM A860 Butt weld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Carbon Steel ASTM A860 Buttweld Fittings
carbon steel pipe fitting 1

Sachiya Steel International is Leading Manufacturer And Exporter of Carbon Steel ASTM A860 Buttweld Fittings, where the machining and welding of this specification presents no particular problems.

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-08-30T13:20:47+05:30August 17th, 2021|

Duplex Steel S31803 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is one of the leading Manufacturer And Exporter of Duplex Steel S31803 Buttweld Fittings, which is manufactured at par with the international quality standards making use of high-grade steel. Duplex Steel S31803 Elbow Butt Weld Pipe Fittings is stainless steel is a stainless steel whose design enables combining improved resistance to pitting, high strength, stress corrosion, crevice corrosion and cracking. Duplex Steel S32205 Tee Butt Weld Pipe Fittings is often used in Chemical Process Industry: such as in Sulphuric Acid Production, Nitric Acid Processes, Phosphoric Acid Processes, Ethylene oxide, Polypropylene Production, PVC, Equipment Handling Organic and Fatty Acids, Chemical Storage and Tankers, Heat Exchangers, etc.

Duplex Steel S31803 Reducer Pipe Fittings resists chloride environments and sulphide stress corrosion. Meanwhile, these Duplex Steel S32205 Cross Pipe Fittings are also being offered in different sizes and shapes to our customers. Duplex Steel S31803 Bend Butt Weld Pipe Fittings will often perform well in environments which cause premature failure of austenitic grades.

Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings | Duplex Steel S31803 Buttweld Fittings| Duplex Steel S31803 Buttweld Fittings

Although Duplex Steel S32205 Stub End Butt Weld Pipe Fittings has good high temperature oxidation resistance, this grade – like other duplex stainless steels – suffers from embrittlement if held for even short times at temperatures above 300 Degree C. If embrittled, Duplex S31803 End Pipe Cap can only be rectified by a full solution annealing treatment. Duplex S32205 Dish Cap Pipe Fittings are almost never used above 300 Degree C.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex Steel S31803 / S32205 Pipe Fittings Specifications
Specifications : ASTM A815 / ASME SA815
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Duplex Steel S31803 / S32205 Pipe Fittings Chemical Composition

S31803 / S32205 C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 – 3.5 22.0 – 23.0 0.03 4.5 – 6.5 0.14 – 0.2 Bal

Duplex Steel S31803 / S32205 Buttweld Fittings Mechanical Properties

S31803 / S32205 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi – 80000 , MPa – 550 Psi – 116000 , MPa – 800 15 %

Equivalent Grades for S31803 / S32205 Duplex Steel Pipe Fitting

STANDARD UNS WERKSTOFF NR.
Duplex Steel S31803 S31803 1.4462
Duplex S32205 S32205 1.4462
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Duplex Steel S31803 / S32205 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Duplex Steel S31803 / S32205 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Duplex Steel S31803 Buttweld Fittings
buttweld fittings 1 500x500 1

Sachiya Steel International is one of the leading Manufacturer And Exporter of Duplex Steel S31803 Buttweld Fittings, which is manufactured at par with the international quality standards making use of high-grade steel. 

Product Brand: Sachiya Steel International

Product In-Stock: InStock

Editor's Rating:
5
[/bt_text][/bt_column][/bt_row][bt_row][/bt_row][bt_row][/bt_row][/bt_section]
By |2021-08-17T10:39:57+05:30August 17th, 2021|

Carbon Steel ASTM A234 Buttweld Fittings Manufacturer

[bt_section][bt_row][bt_column width=”1/1″][bt_text]

 

Sachiya Steel International is a Leading Manufacturer And Exporter of Carbon Steel ASTM A234 Buttweld Fittings, which takes its name from its two – phase microstructure of ferrite and austenite in approximately equal proportions. ASTM A234 Carbon Steel Elbow Butt Weld Pipe Fittings acquire their optimum properties with a balanced ferrite – austenite ratio of approximately 50 / 50. Compared to the austenitic stainless steels, ASME SA 234 Carbon Steel Tee Butt Weld Pipe Fittings contain less nickel (approximately 4 % to 8 %), which results in very good value for money.

ASTM A234 Carbon Steel Reducer are currently the most widespread variants and are distinguished by outstanding application properties and by high availability in all the relevant product forms. Because of their lower nickel and molybdenum content – compared to standard steels – these ASME SA 234 Carbon Steel Seamless Pipe Fittings are economically attractive and have greater resilience, reliability and ease of working than lower alloy austenitic or carbon steels.

Carbon Steel ASTM A234 Buttweld Fittings | Carbon Steel ASTM A234 Buttweld Fittings | Carbon Steel ASTM A234 Buttweld Fittings | Carbon Steel ASTM A234 Buttweld Fittings | Carbon Steel ASTM A234 Buttweld Fittings | Carbon Steel ASTM A234 Buttweld Fittings | Carbon Steel ASTM A234 Buttweld Fittings | Carbon Steel ASTM A234 Buttweld Fittings | Carbon Steel ASTM A234 Buttweld Fittings

ASTM A234 Carbon Steel Bend Pipe Fittings has a low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress – corrosion cracking in most freshwaters. The resistance to a variety of corrosive conditions of ASME SA 234 Carbon Steel Stub End led to its wide use in marine applications and other non – oxidizing chloride solutions.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
Carbon Steel ASTM A234 Pipe Fittings Specifications
Specifications : ASTM A234 / ASME SA234
Size : 1/8” NB TO 48” NB.
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Type : Seamless / Welded / Fabricated
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Carbon Steel ASTM A234 Butt weld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Carbon Steel ASTM A234 Butt weld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

 

[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]No schema found.[/bt_text][/bt_column][/bt_row][/bt_section]
By |2021-08-16T12:09:24+05:30August 16th, 2021|

Carbon Steel ASTM A420 Buttweld Fittings Manufacturers In India

Carbon Steel ASTM A420 Buttweld Fittings Manufacturers In India

Sachiya Steel International is a Leading Manufacturer And Exporter of Carbon Steel ASTM A420 Buttweld Fittings, where appropriate alloy can be considered in lieu of more costly titanium or nickel based alloys. ASTM 420 Carbon Steel Short Radius Elbow Pipe Fittings also has outstanding resistance against sulphide – stress corrosion cracking in sour-gas environments. ASME SA 420 Carbon Steel Unequal Tee Pipe Fittings is not uncommon to see the metal used as a practical solution to chloride – induced stress cracking.

Well known for its high impact strength, ASTM A420 Carbon Steel Eccentric Reducer displays no ductile – brittle transition but only a slight reduction in impact energy as temperature decreases. Ambient and sub – zero (down to minus 50 Degree C) notch ductility of ASME SA 420 Grade WPL6 Carbon Steel Bend is good. These attributes mean that ASTM A420 Carbon Steel Shot Stub End Pipe Fittings can be used successfully as an alternative to 300 series stainless steel (such as type 316), standard 22 % Cr steel and precipitation hardening stainless steels.

Sachiya Steel International is also one of the well – known dealers and supplier of ASME SA 420 Gr. WPL6 Carbon Steel LTCS Pipe Fittings, which is initially developed as a seawater resistant material for pump applications in the sea.

Carbon Steel ASTM A420 Buttweld Fittings Specifications
Specifications : ASTM A420 / ASME A420
Size : 1/8” NB TO 48” NB.
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS
Type : Seamless / Welded / Fabricated

Carbon Steel ASTM A420 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Carbon Steel ASTM A420 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-09-11T12:28:27+05:30August 16th, 2021|

Nickel 201 Buttweld Fittings Manufacturers In India

Nickel 201 Buttweld Fittings Manufacturers In India

Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality Nickel 201 Buttweld Fittings, which effectively resists water containing hydrogen sulphide or carbon dioxide. The resistance of Nickel 201 Elbow Butt Weld Pipe Fittings to corrosion by distilled and natural waters is excellent. In distilled water, the corrosion rate of Nickel 201 Tee Butt Weld Pipe Fittings has been found to be less. Corrosion rates of Nickel 201 Cross Butt Weld Pipe Fittings in domestic hot water up to 200 Degree F (95 Degree C) are normally less and only occasionally high.

In distilled water saturated with 50 / 50 carbon dioxide and air at 160 Degree F (71 Degree C), the corrosion rate of Nickel 201 Reducer Butt Weld Pipe Fittings is less. Nickel 201 Bend Butt Weld Pipe Fittings is used for oil well strainers where corrosion by hydrogen sulphide and brine must be combatted. Nickel 201 Stub End gives excellent service in flowing sea water even at high velocity, but in stagnant or very low – velocity sea water severe local attack may occur under fouling organisms or other deposits.

Nickel 201 Buttweld Fittings

In steam – hot water systems where the steam contains carbon dioxide and air in certain proportions, corrosion rates of Nickel 201 End Pipe Cap will be initially high but will decrease with time if conditions favor the formation of a protective film.

Nickel 201 Buttweld Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Nickel 201 Pipe Fittings Chemical Composition

Nickel 201 Ni C Mo Mn Si Fe P S Cu Cr
Balance 0.15 max – 0.35 max 0.35 max 0.40 max – 0.01 max 0.25 max –

Nickel 201 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %

Equivalent Grades for 201 Nickel Pipe Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 201 N02201 2.4068 – LC-Ni 99 NW 2201 NA 12 НП-2

Nickel Alloy 201 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 201 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-15T12:19:25+05:30August 14th, 2021|

Nickel 200 Buttweld Fittings Manufacturers In India

Nickel 200 Buttweld Fittings Manufacturers In India

Sachiya Steel International is one of the leading Manufacturer and Exporter of Nickel 200 Buttweld Fittings to the valued customers, which has some excellent features to offer such as lightweight, durable, dimensionally stable, and more. Our Nickel 200 Elbow Butt Weld Pipe Fittings (UNS N02200) are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. These Nickel 200 Tee Butt Weld Pipe Fittings are commercially pure wrought nickel, and has good mechanical properties and excellent resistance to many corrosive environments.

Our Nickel 200 Reducer are often used in Chemical Processing and Storage. Meanwhile, these Nickel 200 Cross Butt Weld Pipe Fittings are also being offered in different sizes and shapes to our customers. Our annealed Nickel 200 Pipe Bend has a low hardness and good ductility and malleability. These attributes, combined with good weldability, make these Nickel 200 Stub End Butt Weld Pipe Fittings highly fabricable.

Our Nickel 200 Pipe End Cap has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility. Typically, the elemental restrictions of these Nickel 200 Dish Cap Butt Weld Pipe Fittings and nickel 201 pipe fittings are combined into one dual- certified chemistry resulting in a single alloy with the desired characteristics of both alloys.

Nickel 200 Buttweld Fittings

Nickel 200 Buttweld Fittings Specifications
Specifications : ASTM B366 / ASME SB366
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Standards
 : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated

Nickel 200 Pipe Fittings Chemical Composition

Nickel 200 Ni C Mo Mn Si Fe P S Cu Cr
99.0 min 0.15 max – 0.35 max 0.1 max 0.4 max – 0.01 max 0.25 max –

Nickel 200 Buttweld Fittings Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.9 g/cm3 1446 °C (2635 °F) Psi – 21500 , MPa – 148 Psi – 67000 , MPa – 462 45 %

Equivalent Grades for 200 Nickel Alloy Pipe Fitting

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Nickel 200 N02200 2.4066 N-100M Ni 99.2 NW 2200 NA 11 НП-2

Nickel Alloy 200 Buttweld Pipe Fittings Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Nickel 200 Buttweld Fitting Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

By |2024-04-16T15:33:28+05:30August 14th, 2021|
LOGO 1200 X 300

D-2, Office No 3, Bharat Nagar CHS, Near Shalimar Cinema,
Grant Road ( East ) , Mumbai- 40007, Maharashtra, India.

[email protected]
[email protected]

OUR PRODUCTS

ACCREDITATION

certified stamp

© Copyright - 2024 | Sachiya Steel International | All Rights Reserved | Terms & Conditions | Privacy Policy | Sitemap

Go to Top