Sachiya Steel International is one of the well – known trading house and dealer of ASTM B514 Welded Pipes, which is available in different designs, shapes and sizes to our clients. The molybdenum content of the nickel – molybdenum alloys such as these ASTM B514 Nickel-Iron-Chromium Alloy Pipes is that there is a strong tendency for phases other than the desirable (face – centered cubic) gamma phase to form in the microstructure, particularly in the temperature range 500 Degree C to 900 Degree C.
ASTM B514 Welded Pipes Manufacture
The time – temperature – transformation diagram shown above illustrates the advantages of these ASTM B514 Nickel-Iron-Chromium Alloy Welded Pipes over its predecessor (B-2 alloy). One of the chief attributes of these ASTM B514 Nickel-Iron-Chromium Alloy Cold-Worked Pipes is their resistance to chloride – induced stress corrosion cracking. A common solution for assessing the resistance of these ASTM B514 Nickel-Iron-Chromium Alloy Annealed Pipes to this extremely destructive form of attack is boiling 45 % magnesium chloride (ASTM Standard), typically with stressed U – bend samples. As is evident from the following results, these ASTM B514 Tubes are much more resistant to this form of attack than the comparative, austenitic stainless steels. Wrought products such as these ASME SB 514 Nickel-Iron-Chromium Alloy Pipes are being supplied in the Mill Annealed (MA) condition, unless otherwise specified.
This solution annealing procedure has been designed to optimize the corrosion resistance and ductility of these ASME SB 514 Nickel-Iron-Chromium Alloy Welded Pipes.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
ASTM B514 Welded Pipes Specifications |
||
| Size | : | 6.00 mm OD up to 914.4 mm OD |
| Thickness | : | 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS |
| Length | : | Within 13500mm |
| Type | : | Welded Pipes |
| Grades | : | UNS N08800, UNS N08810, UNS N08120 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
[/bt_text][/bt_column][/bt_row][bt_row][bt_column width=”1/1″][bt_text]
ASTM B514 Welded Pipes
Sachiya Steel International is one of the well – known trading house and dealer of ASTM B514 Welded Pipes, which is available in different designs, shapes and sizes to our clients.
Product Brand: Sachiya Steel International
Product In-Stock: InStock
5
