Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Alloy 20 Wire, which is the standard term referring to steels with other alloying elements added deliberately in addition to the carbon. This Alloy 20 Wire is often subdivided into two groups: high alloy steels and low alloy steels, where the difference between the two is defined somewhat arbitrarily. The most agree that any steel that is alloyed with more than eight percent of its weight being other elements beside iron and carbon, is our Alloy 20 Wire.

Alloy 20 Wire

Common alloyants in this Alloy 20 Coil Wire include manganese (the most common one), nickel, chromium, molybdenum, vanadium, silicon, and boron. These metals in our Alloy 20 are added to produce specific properties that are not found in regular carbon steel. The elements are added in varying proportions (or combinations) making Alloy 20 Welding Electrode take on different aspects such as increased hardness, increased corrosion resistance, increased strength, improved formability (ductility); the weldability can also change.

Alloying elements in our Carpenter 20 Wire are added to change mechanical or physical properties. Carpenter 20 Filler Wire is considered to be an alloy when the maximum of the range given for the content of alloying elements exceeds one or more limits. Our Carpenter 20 Electrode is often specified when high strength is needed in moderate – to – large sections.

Alloy 20 Wire Specifications
Specifications : ASTM B473 ASME SB473
Dimensions : ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360
Length : 100 mm TO 6000 mm
Diameter : 10 mm To 100 mm
Specialize : Filler Wire, Coil Wire, Electrode Wire, Welding Wire.

Alloy 20 Wire Chemical Composition

Alloy 20 Ni C Mo Mn Si Fe Cu S P Cr
32 – 38 0.02 max 2 – 3 1 – 2 0.7 max Bal 3 – 4 0.005 max 0.02 max 19 – 21

Alloy 20 Wire Mechanical Properties

Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.1 g/cm3 1443 °C (2430 °F) Psi – 35000 , MPa – 241 Psi – 80000 , MPa – 551 30 %

Equivalent Grades for Alloy 20 Wire

STANDARD UNS WERKSTOFF NR. AFNOR EN JIS BS GOST
Alloy 20 N08020 2.4660 Z2NCUD31-20AZ NiCr20CuMo – – –

Alloy 20 Wire Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry

Alloy 20 Wire Test Certificates

We at Sachiya Steel International provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1 and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc

Material Testing

We at Sachiya Steel International ensure that all our materials go through strict quality tests before dispatching them to our clients.

• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and Macro Test
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test

Documentation

• Commercial Invoice which includes HS Code
• Packing List including net weight and gross weight, number of boxes, Marks and Numbers
• Certificate of Origin legalized/attested by Chamber of Commerce or Embassy
• Fumigation Certificates
• Raw Material Test Reports
• Material Traceability Records
• Quality Assurance Plan (QAP)
• Heat Treatment Charts
• Test Certificates certifying NACE MR0103, NACE MR0175
• Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
• Guarantee Letter
• NABL approved Laboratory Test Reports
• Welding Procedure Specification/Procedure Qualification Record, WPS/PQR
• Form A for the purposes of the Generalized System of Preferences (GSP)

Alloy 20 Wire
Alloy 20 Wire Manufacturer

Sachiya Steel International is One Of The Leading Manufacturer And Exporter Of High Quality Alloy 20 Wire, which is the standard term referring to steels with other alloying elements added deliberately in addition to the carbon. This Alloy 20 Wire is often subdivided into two groups: high alloy steels and low alloy steels, where the difference between the two is defined somewhat arbitrarily. The most agree that any steel that is alloyed with more than eight percent of its weight being other elements beside iron and carbon, is our Alloy 20 Wire.

Product Brand: Sachiya Steel International

Product Currency: INR

Product Price: 110

Product In-Stock: InStock

Editor's Rating:
5